Feature(may vary by option.)
●【Parameter】- Thread Size: 5-40; HSS (High-Speed Steel); Accuracy: H2.Standard thread design,clear and tidy,provide rapid chip removal for efficient threading.
●【Material】- High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications. Used with some cutting fluid or keep it wet when tapping, the will last longer.
●【Design】- Standard American thread design, clear and tidy, can quickly remove chips to achieve efficient thread processing. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
●【Multi-function】- The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut. Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.
●【Note】- Before tapping,confirm whether the diameter of the round hole is appropriate;If the hole is too small for tapping,the tap will wear out more unnecessary,which will increase the risk of tap breakage.
[3 & 8-16 2pcs]
[10-32 1pcs]
[10-32 2pcs]
[8-32 2pcs]
[8-32 1pcs]
[5 & 16-18 2pcs]
[5 & 16-18 1pcs]
[1 & 4-20UNC 2pcs]
[12-24 1pcs]
[12-24 2pcs]
[1 & 4-20UNC 1pcs]
[6-32 1pcs]
[6-32 2pcs]
[6-40 1pcs]
[6-40 2pcs]
[4-40 1pcs]
[4-40 2pcs]
[7 & 16-14 1pcs]
[7 & 16-14 2pcs]
[5-40 1pcs]
[5-40 2pcs]
Description
- When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce taps loss.
- Please be sure to take protective measures when working,and you need to wear goggles and protective gloves.
