Feature

●【Widely Application】Universal tow bar adapter bracket adapts on any base plate to Blue Ox tow bars with cross angle. Replace for Blue Ox BX88230. Work for various vehicles, such as Jeep, Ford, GMC, Toyota etc.
●【Notice】 Most vehicle bumpers are not suitable for towing when it is no modification and reinforcement. These brackets cant be installed on rubber or plastic. The mounting brackets should be attached to a flat metal surface.
●【Build Your Own Base Plaste】 Allows certain vehicles to build your own base plate to fit Blue Ox tow bars for flat towing. Setup works great off-road and when towing. 5,000 lbs. gross trailer weight rating is developed to provide steady performance and reliability.
●【Bolt-on Tow Bar Attachment】The general purpose adapter kit is bolt-on type for easy attachment to tow bar for vehicles. Drilling four 17/32"holes in the bumper is required. Includes Mounting Hardware. The tow bar accessories will require no modification.
●【Heavy-duty Base Plate Bracket】Tow Bar Adapter Brackets are made of quality heavy-duty steel, resistant to corrosion and rust to work in rough road and weather conditions. Sturdy machined and welded steel structure ensures life-long use. Includes 2 brackets, backing plates and mounting hardware.
●【SATISFACTION GUARANTEE】 If youre not 100% satisfied with this tool, simply return it for a full refund in 30 days, guarantee with 12 months’ warranty.


Description

11
11

11
Easy to install

  • Bolt-on type
  • Drilling four 17/32"holes in the bumper is required.
  • Includes Mounting Hardware.
  • Requires no modification.

  • Made of quality heavy-duty steel, high strength, corrosion resistance, rust and wear resistance, strong and durable. Sturdy machined and welded steel structure ensure life-long to use.

BX88230 Class III Universal Bolt-On Adapter Tabs

Tow Bar Adapter Kit

Application

  • For connecting any base plate to Blue OX towbars. Work for most vehicles with a metal flat bumper, such as Jeep Wrangler JL JK, Ford, Toyota etc.

Benefits

  • Allows certain vehicles to build own base plate. Fixes with cross angle.

Performance

  • Setup works great off-road and when towing.
  • Towing capacity of 5000 lbs rated
  • Developed to provide steady performance and reliability

11

NOTICE

  • Most vehicle bumpers are NOT suitable for towing without modification and reinforcement.
  • These brackets should never be attached over rubber or plastic.
  • The mounting brackets should be attached metal to metal and to a flat surface.
  • The bumper and the bumper bracket may need to be reinforced.

11

Installation Instruction

  1. Locate the center of your bumper and measure out 10 9/16to either side. From the center of that mark measure over 211/8" to the opposite side. Drill 17/32" holes at these marked points.
  2. The tabs are not welded in the center of the baseplate, be certain that the tabs are offset to the center of the bumper(as shown in the diagram). Attach the baseplate to the bumper using the inside bracket holes and the bumper holes drilled in Step 1.
  3. Mark 17/32" holes in the bumper for the outer bracket holes, using the bracket as a template.
  4. Remove the brackets and drill 17/32"holes in the bumper at the points marked.
  5. lnstall the brackets using all the holes and hardware.NOTE: IF THE BUMPER SHOULD HAVEATUBE BEHIND IT,DRILL THROUGH BOTH AND USE THE LONGER BOLTS AND BACKING BRACES PROVIDED.IF USING ANA FRAMETOWBAR, CHECK THAT IT MOVES FREELY UPANDDOwNBEFORE FINAL TIGHTENING. BE SURE AND USE LOCTITE ON ALL BOLTS BEFORE TIGHTENING. TORQUE ALL BOLTS ACCORDING TO TORQUE SPECIFICATIONS ON THE CHART.
  6. lnstall the tow bar and safety cables according to the instructions included in their packages.
  7. Do not substitute other devices if the pin and clip are lost.

11
11
11

Product information