Feature(may vary by option.)

●【High Precision & Superb Penetration】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm thick plywood, 10mm thick dark acrylic, engraved ceramics, and stainless steel.
●【Safety Protection Design】The laser cutter and engraving machine are equipped with a very convenient power switch, which is not available in others. The laser filter cover filters 98% of the UV light to the eyes, you can watch laser engraving without wearing goggles and prevent animals from catching the laser spot. Comes with a steel pad that can protect the table from laser damage, and isolate fire hazards.
●【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL (free), LightBurn (paid), Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Mac system (LightBurn), and engraving file format Support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. (You can view the software operation tutorial in the video)
●【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrading. Or replace the longer extension kit to expand the engraving area to 410*950mm (additional purchase required).
●【Fast Focusing & Quality Assurance】The S9 laser engraving combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete the focusing. This makes it very easy to use the laser. If you have any problem with our product, please freely contact us. We provide 12 months of product warranty and 24x7 friendly customer service.

[S9 5w]

[S30 Ultra 33w+air Assist]

[S30 Ultra 22w+air Assist]

[Sf-a9 40w]

[S30 Ultra 11w+air Assist]

[Honeycomb Bed 400x400mm]

Description

Higher Accuracy DIY Laser Cutter and Engraver Machine

Best Desktop High Power DIY Laser Cutter and Engraver Machine for business starters, hobbyists, designers, artists, home-makers, professionals.
Better technologies (industrialized steel wheel&shaft, tension wheel, synchronous belt, Compressed light spot,etc.) makes the carving more precise and the carved works perfect.
More humanized designs, you can concentrate on your creation all the time.


90w Effect Laser Beam Shaping Technology To get a super high density energy laser beam, S9 uses the latest 5.5W laser beam shaping technology with 0.06*0.06mm ultra-fine laser spot, which has powerful cutting ability and precise carving ability.	Super Cutting Penetration S9 has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, easily carve ceramics and stainless steel.	Ultra-thin Engraving Line Professional test pattern and film ruler show that the S9 engraving line is only 0.08mm, thinner than a hair. This means that S9 can engrave more precise, clear, and delicate objects.


Longer Service Life Using imported chips and circuits motherboard, structure, technology has been optimized, built-in fan cooling system, the module will not heat up even after working a long time, improving the service life.	Fast Focusing Design S9 combines a fixed focus lens and a sliding design. You only need to slide the laser and tighten the screws to complete focusing. No tools needed, fast and easy.	New Eye Protection Design The laser filter filters 98% of UV light into your eyes. You and those around you can watch laser engraving without goggles. It also prevents animals from catching the laser spot.

Engraving/Cutting Material：

.Engraving Materials: wood, paper, cardboard, plastic, white, PCB board, aluminum oxide, black-painted metal, dark ceramic
Cutting Material: 10 mm thick wood boards, 6mm plywood & acrylic, cardboard, fabric, bamboo, plastic board
Operating Software: LaserGRBL, LightBurn, Benbox, GrblController, LiteFire. (You can view the software operation tutorial in the video)
Supporting System: Windows XP, 7,8,10 system, MAC system.
Supported File Formats: NC, BMP, JPG, PNG, DXF and other image formats

Please pay attention to the following matters when using the machine:

For detailed machine instructions, please refer to the manual for parameter settings.
When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles.
Please do not touch the laser emitter with your hand, or it may burn your hand.
Please avoid strong impact on the machine.
Please set up laser engraver in the fireproofing area, with good ventilation.
Children under 14 are not allowed to use this product and children over 14 need adult supervision.
The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire.


Safety Protection Steel Pad The included steel pad protects the table from laser damage. Isolates fire hazards. Don’t worry about the laser damaging the table, this is our unique and thoughtful service.	Convenient Scale And Safety Switch X-axis and Y-axis are engraved with precise scale lines for quick measurement of engraved or cut objects. Equipped with a power switch to turn off the machine in case of emergency.	Expandable Working Area The machine comes standard with a 410420mm engraving area, yet it is expandable to like 410950mm, extension accessories sold separately.	Example Normal engraving machines can only engrave smaller square areas, but the S9 can engrave longer engraving needs, such as wall mural, skateboards, fish, shrimp, etc.

Machine Package List

1 x X-axis assembly

2 x X shaft

2 x Y shaft

1 x control box

1 x laser module

3 x support feet

1 x 12V 3A power adapter

1 x power cord

1 x USB cable

Step 1~5 Installation Package

2× belt

3× T-shaped/L-shaped M5/M4/M3 driver

10×Tie

1× 8-10mm nut wrench

1× brush

1× Laser goggle

2× 10x10cm wood board

1× A4 size steel pad

Specification:

Effect Power: 90W
Laser Output Power: 5.5W-6W
Engraving Accuracy: 0.01mm; Engraving Line: 0.08mm
Laser Spot: 0.06*0.06mm
Laser Wave Length: 445 ± 5nm
Data Transmission Method: USB Connection
Input Voltage: 100-240V AC, 50/60HZ
Output Voltage: 12V 3A


	SCULPFUN S9	SCULPFUN S30	SCULPFUN S30 Pro	SCULPFUN S30 Pro Max	SCULPFUN S9 Expansion Kit	SCULPFUN Air Assist
Laser Output Power	5W	5W	10W	20W	Accessories	Accessories
Laser Spot	0.06*0.06mm	0.06*0.06mm	0.06*0.08mm	0.08*0.1mm	Size: 950*410mm	Cut faster & deeper
With Automatic Air Assist?		✓	✓	✓