Feature(may vary by option.)

●1. The programming card is used to set the parameters of the brushless power regulator. The setting card interface is very intuitive and friendly. It can easily set various parameters of electric regulation. The setting card is small and portable, which is very suitable for Outfield use.
●2. The item value on the left corresponds to the blue text function option, and the value value on the right corresponds to the white text function option corresponding to the blue function option on the left.
●Size: 88mm (length) * 58mm (width) * 14mm (thickness) Weight: 40g Input voltage: 4.8v-7.4v (when the ESC itself has no BEC output, it is necessary to use a separate battery pack to supply power to the setting card)
●4. Up to 12 functions can be set：（1. Running Mode 2. Drag Brake 3. Low Voltage Cut-off 4. Startup Mode (Punch) 5. Maximum Braking Force 6. Maximum Reversing Force 7. Initial Braking Forc 8. Neutral Range 9. Timing 10. Over-Heating Protection 11.Motor rotation 12.Lipo cells）
●5. This is the V2 version of the program card. This program card is not applicable to V3 ESC with turbo function. If it is an ESC with turbo function, you need to purchase V3 program card.
●6. Note：Due to the purchase demand of the majority of consumers, a connecting line of about 30cm is now equipped, which is more convenient to use. Thank you for your patronage!
●7. Now, according to the users requirements, the ESC with a 3-pin wire.

[120A-ESC-T]

[120A-TPLUS-CARD]

[ESC LED Program Card]

Description

1. The programming card is used to set the parameters of the brushless power regulator. The setting card interface is very intuitive and friendly. It can easily set various parameters of electric regulation. The setting card is small and portable, which is very suitable for Outfield use. 2. The item value on the left corresponds to the blue text function option, and the value value on the right corresponds to the white text function option corresponding to the blue function option on the left. 3. Size: 88mm (length) * 58mm (width) * 14mm (thickness) Weight: 40g Input voltage: 4.8v-7.4v (when the ESC itself has no BEC output, it is necessary to use a separate battery pack to supply power to the setting card) 4. Up to 12 functions can be set：（1. Running Mode 2. Drag Brake 3. Low Voltage Cut-off 4. Startup Mode (Punch) 5. Maximum Braking Force 6. Maximum Reversing Force 7. Initial Braking Forc 8. Neutral Range 9. Timing 10. Over-Heating Protection 11.Motor rotation 12.Lipo cells） 5. This program card cannot set the program of ESC of V3 or above.Now almost all esc with 3-pin wire, so the program card without 3-pin wire. The store also sell high-quality 480A ESC and 550 brush motors and RC servo, which can be purchased if necessary. Thank you for your patronage!