Feature

●Parameter:Inlet/Outlet Dia:1/2" MNPT, Volume:0.75 Liter(25 FL OZ), Water psi:Max 125 PSI (8.6 BAR)
●Connect Accumulator Tank to outlet side of water pump for best results， Accumulator tanks hold a reservoir of air and water down stream from the pump.
●Internal rubber membrane eliminates maintenance and simply fitted to new or existing systems. Longer pump life, reducing noise and providing a more consistent water supply.
●Accumulators allow the pump to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery.
●Applications:Boat,Marine, RV,Caravan,ect


Description

YaeMarine 0.75L 125 PSI, Pre-Pressurized Accumulator Tank Pressure Storage Vessel Hold Water Under Pressure Water Pump Flow Control Internal Bladder 25oz for Boat,Marine, RV,Caravan
Paramete:
Inlet/Outlet Dia:1/2" MNPT
Volume:0.75 Liter(25 FL OZ)
Water psi:Max 125 PSI (8.6 BAR)
Pre-charge pressure:10 PSI(0.87 BAR)
Air Fill Vale:standard automotive style tire valve.
Applications:Boat,Marine, RV,Caravan,ect

Note:
1.Relieve air psi prior to disassembly
2.Do not use to pump flammable fluids,gasoline,kerosene fuel oil.
3.Do not use pump in a explosive environment or use where flammable vapors are present.
4.Do not use pump Petrol or fluids with flash point below 37°C(98°F).
5.The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set accumulator tank to ~3 PSI below your water pumps cut-in pressure and make sure it is connected to the outlet of the pump
6.Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank.