Feature(may vary by option.)

●For All Household Iterms with Screws, Fasten Bolts & Nuts for a Long Time to Avoid Loosening Due to Vibration, And prevent the bolts from rusting. Family must-have to Etend the Life of Items and Safe Using!
●Specially Designed for Families: Optimize the Product Formula, It Provides Medium-strength Curing Fastness and Viscosity to Ensure the Normal Use of Items, And Provides Medium-strength Torque that Allows You to Manually Remove Bolts & Nuts with Tools.
●Widely Uses: Suitable for bolts below M20, Such as Cars and Auto Electronics, Household Appliances, Kitchen and Bathroom Appliances, Personal Electronics, etc.
●Simple Use: Just Apply a Dab of this Product Along the Screw to the Fixing Position of the Bolt & Nut, And then the Product will Start to Cure in 10 Minutes, And Your Items can be Used Normally after Fully Cured in 24 hours.
●Brand Guarantee: Same formula, Same using experience. American brand, Chinese OEM. Please believe in the power of ESKONKE brand, We strive to provide the best quality products and the best customer experience.

[242]




[243]




[620]




[603]




[648]




[242   &  271]




[638]




[271]




[680]




[609]





Description

Brief Introduction to ESKONKE Retaining Compound

ESKONKE retaining adhesive can improve the shear strength of cylindrical unthreaded assembly operations.

The holding adhesive has the ability to transfer loads to the maximum extent and can evenly disperse them, eliminating stress concentration and corrosion at the assembly interface.

As a liquid application, holding adhesive can achieve 100% bonding on two metal bonding surfaces, reducing the cost of improving part processing accuracy and improving assembly process efficiency.

603 609 620 638 648 680
Retaining Compound 603 Retaining Compound 609 Retaining Compound 620 Retaining Compound 638 Retaining Compound 648 Retaining Compound 680
Shear Strength 3770 psi 2300 psi 2500 psi 3625 psi 4480 psi 2880 psi
Glue Viscosity(77℉) 100 ~ 150 mPa.s 110 ~ 140 mPa.s 5000 ~ 12000 mPa.s 2000 ~ 3000 mPa.s 450 ~ 550 mPa.s 750 ~ 1750 mPa.s
Viscosity Grade Low Viscosity Low Viscosity High Viscosity Medium Viscosity Low Viscosity Medium Viscosity
Viscosity Thixotropy ✓
Maximum Filling Gap 0.13 mm 0.13 mm 0.38 mm 0.25 mm 0.13 mm 0.38 mm
Initial Curing Time 10 min 10 min 60 min 4 min 4 min 10 min
Curing Time 24 Hours 24 Hours 24 Hours 24 Hours 24 Hours 24 Hours
Operating Temperature Range -65 ~ 302 ℉ -65 ~ 302 ℉ -65 ~ 450 ℉ -65 ~ 356 ℉ -65 ~ 356 ℉ -65 ~ 356 ℉
ANTI-OIL ✓ ✓ ✓ ✓ ✓
Corrosion/Chemical Resistance ✓ ✓ ✓
2423524235

Why do you need it?

  1. Fill Gaps Between Components
  2. Lock Components to Prevent Loosening
  3. Prevent Component Abrasion & Corrosion
  4. Improve the Accuracy of Component Fit
  5. Isolate Oxygen and Prolong Product Life
  6. Tightness to Prevent Leakage
  7. Evenly Distribute Loads and Stresses
  8. Repair Minor Defects in Parts
  9. Reduce Design and Process Complexity

456456456456

PRECAUTIONS

  • Curing conditions: metal material; air isolation; Gap is lower than the maximum gap;
  • Make sure the components are at room temperature, dry and clean. The cleaning solvent can use trichloroethane, trichloroethylene, methyl ethyl ketone, methanol, etc. It is not suitable to use gasoline, kerosene, fuel oil, hydrocarbon solvents, etc., which are easy to leave an oil film on the metal surface;
  • Grinding the metal surface that needs to be bonded is beneficial to improve the bonding strength;
  • Not suitable for use in pure oxygen or oxygen-enriched environments, and cannot be used as a sealing material for chlorine or other oxidizing substances;
  • Not suitable for bonding porous materials such as plastic, wood, paper, etc. For active metals such as steel, copper, and alloy metals, it has fast curing and high strength, and for inert metals such as stainless steel, zinc, and cadmium, it has slow curing and low strength. Please understand product compatibility before use;
  • When dismantling, it can cooperate with mechanical auxiliary equipment and heat the components to 200~300°C (392~572°F), or it can be dismantled after soaking with special scavenger for a long time;
  • Seal as soon as possible after use to avoid volatilization of active ingredients;
  • Do not pour the unused glue back to avoid contamination;
  • Do not replace the storage container during storage. In order to avoid curing during transportation, the actual capacity is only half of the bottle capacity;
  • Store in cool/normal temperature (8~21℃/46~70°F), avoid sunlight.

Whats in the box

  • Bottle