Feature(may vary by option.)
●There are three colors you can choose, blue, green, red. Simple installation, all in-line components. This digital clock is a diy kit and needs to be installed by yourself. A very good choice for those who like to solder or who want to practice soldering.
●Product features: Voice time, hourly chime, alarm clock, temperature correction, Temperature display, Nightlight function, Week display, automatic brightness adjustment, Date display,power-off memory,Multiple display modes are available.
●Size:With transparent shell, length 11.5cm, width 3.2cm, height 4cm. Net weight: 150g
●Single chip microcomputer:STC15W408AS DIP-28,Clock IC:DS1302 DIP-8.32867hz crystal oscillator,CR1220 button battery with power off memory function,USB turn 5V power input. Note: battery is not included.
●One year warranty, your satisfaction is our pursuit. Any questions about our clock making kit, contact with us at any time.
[Red]
[Blue]
[Green]
Description
Product parameters
The product contains a paper manual. Scan the QR code on the manual to enter the web manual, including detailed welding step diagrams and welding step videos, and instructions for setting the clock.
clock function:Voice timekeeping function, hourly timekeeping function, temperature display (correction), alarm clock, night light, automatic brightness adjustment, date display, week display, power-off memory
Setting
1. Reset: Press and hold 3 buttons at the same time for 5 seconds, then 12:00 is displayed, and the reset is successful. (The default is to turn off the voice and alarm functions)
2. Set time, alarm clock, hourly report
a. Adjust ‘hour’: press the function button (the hour nixie tube flashes and the second flashes), press the plus button to modify the ‘hour’;
b. Adjust ‘minute’: press the function button again (the sub-digital tube flashes and the second point flashes), press the plus button to modify the ‘minute’ (automatically start from 0 seconds);
c. Adjust the alarm ‘hour’: Press the function button again (the hour digital tube flashes, the second does not flash), press the plus button to modify the alarm ‘hour’;
d. Adjust the alarm ‘minute’: press the function button again (the digital tube flashes, the second does not flash), press the plus button to modify the alarm ‘minute’;
e. Set whether the alarm clock is on or not: press the function button again (all digits are not displayed), press the plus button, "dot 4" is on (alarm on), "dot 4" is off (alarm off);
f. Set theHourly Time Report time: press the function button again (the digital tube flashes), press the plus button to modify the start time of the alarm (for example, if it is set to 9, the hourly hour report starts at 9 in the morning); press again Function button (flashing on the digital tube), press the plus button to modify the end time of the alarm (for example, if it is set to 23, there will be an hourly report from 9 am to 23 pm, and there is no hourly hour report when resting at night, which does not affect sleep);
g. Set whether the hourly hour report is on: press the function button again (all the numbers are not displayed), press the plus button, "point 3" is on (on the hour), "point 3" is off (the hour is off)
h. Press the function key to exit and the setting is complete.
3. Temperature correction, setting date, day of the week Press
Warm prompt
The product is a spare part, which needs to be welded and assembled by yourself.