Easy & Safe
- Pull up all pins on the dail with your finger or small screwdriver.
- For the desired period (or periods) you want the device turned on, then push down ALL the pins that fall on or within that period.
- Rotate the timer’s dial clockwise until the triangular pointer is pointing to the current time of the day.
- Set the override switch to TIMER ON position.
- Plug the timer into an outlet.
- Plug your device/lamp into the timer.
Note: Pre-set On/Off commands can be interruped by using manual override switch located on top of timer.When switched to "OUTLET ON" position,connected lamp or device will be switched on permanently.