Latronix Device Server with PoE - Simplicity and Speed The UDS1100 Device Server with PoE enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. Ports: 1 x RJ 45, 1 x DB 25. Dimensions: 3 1/2"(H) x 2 1/2"(W) x 0.9"(D). Compatibility: PC. Form factor: Wall mountable, Processor speed: 48 MHz. Ethernet technology: Fast ethernet, Data link protocol: Ethernet, fast ethernet, RS 232, RS 422, RS 485. Interface/ports: 1 x serial - RS 232/422/485 - 25 pin D Sub (DB 25), 1 x network / power - Ethernet 10base T/100Base TX - RJ 45. Connectivity technology: Wired. Status indicators: Link activity, power, status. Standard memory: 256 KB, Memory technology: SRAM, Flash Memory installed (Max): 2 MB. Operating temperature: 41 - 122 deg F. Input voltage: 30 VDC. Software selectable RS232, RS422 or RS485, flow control, DHCP support, ARP support, half duplex mode, full duplex mode. Network protocols: TCP/IP, UDP/IP, ICMP/IP, Remote management protocol: SNMP, Telnet, HTTP. Certificate and standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af, UL, CSA, FCC, CE, TUV, C Tick, C Tick. Weight: 7.05 oz. Warranty: 2 years limited. This external device server with PoE from Latronix allows you to quickly network, monitor, control, and access any device with a serial port over an Ethernet connection. Featuring one port and a small size, this device allows you to replace your dedicated PCs and modem lines with a product that will outperform, and it is wall mountable so it wont get in the way. Install this Latronix device server to control your network equipment with ease.