Feature

●Size - 13 Teeth 5mm (0.2") thickness, 16mm (0.63") Bore Diameter, 9.525mm (3/8") Pitch, Keyway: 5mm (0.2"), Hub Height: 17mm (0.67"), Tooth Outer Diameter: 43mm (1.69").
●Material - Made of A3 steel (Q235), the teeth are high-frequency quenched, with high hardness and wear resistance.
●Feature - The chain Sprocket is usually mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees.
●Application - Used in hardware, milling machine, machinery and other occasions
●Notice - The surface has not been treated with anti-rust, so there may be rust on the surface, but this does not affect the use, you can use sandpaper to remove the rust spots before using.


Description

11

1. Sprockets are durable gears that are used in combination with roller chains to power all types of machinery. As the sprocket rotates, the teeth grab onto the chain and move other parts that interlock with the chain.

2. The speed of the sprocket should not exceed that allowed by a drive sprocket of the same size. Each roller sprocket has strong teeth that latch onto the chain. It is suggested that the sprocket has at least three teeth meshed with the chain.

3. Made of A3 steel (Q235), the teeth are high-frequency quenched, with high hardness and wear resistance.

4. Used in hardware, milling machine, machinery and other transmission occasions.

5. Note: The measurement allowed tolerance is+/-1-3cm.