Feature(may vary by option.)
●✔️Yellow & Black Reflective Paper Design: Eye-catching yellow and black warning bars can improve visibility during the day. Built-in reflective materials can help attract drivers attention and improve driver and passenger safety in low light conditions or at night.
●✔️Protect the car from scratches: The garage wall protective layer is made of high-quality EVA foam. The thickness of the foam protective layer can effectively absorb shock to protect the car door and garage wall from scratches and bumps, and protect the corners. Avoid accidental damage.
●✔️Easy installation: the garage door edge protector is self-adhesive. Just peel off the paper lining and stick the bumper directly on the wall to a certain height to align with the door or bumper. (Before pasting, remove dust, oil, or water from the surface and keep it flat.)
●✔️Wide Application: which can perfectly adapt to the pillars or walls at an angle of 90 degrees or more. Suitable for garage pillar or garage wall. It is an ideal choice for small and large commercial garages, indoor and outdoor parking lots, hotels, supermarkets, hospitals, schools, and stadiums.
●✔️What You Will Get: The garage wall protector set includes 2 pieces of anti-collision foam strips with size 400*150*20mm/15.7*5.9*0.8inch, which can be cut into multiple pieces or different shapes.
[4-Pack(Black Yellow)]
[2-Pack(White Red)]
[2-Pack(Black Yellow)]
[4-Pack(White Red)]
Description
|
|
|
|
|---|---|---|
|
It could be fixed on the wall according to the height of the car door to protect the vehicle door from damage from the bumper, body, and other places. |
Semi-rigid foam prevents damage to vehicles and buildings, especially in areas with limited space. |
The edge protector can be attached to the square column to protect the body in all directions. |
Compatible with Various Walls
Instruction:
- Please clean and dry the wall surface and remove any particles on it;
- Peel approximately 4” or 10cm adhesive cover from one side and apply the protector on the wall.
- Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.
- Repeat the same steps above for the other side of your garage wall.
Notice before use:
- Please do not put under extremely high temperature or exposure to the sun for long;
- Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;
- Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care because the adhesive is very strong.
Wide Application
