Attachment
Allow engine to reach normal operating temperature.
Stop engine remove all glow plugs or injectors(refer to vehicle manufacturers manual ).
The compression tester(with correct fitting attached)can now be screwed into 8 glow plug/injector hole.Ensure that fitting is screwed in securely.
Disconnect the fuel shut off solenoid to disable the fuel injection pump.
With the throttle in the wide open position,turn the engine over 6-8 revolutions.The dial gauge(5) will automatically record the highest pressure reached.
To release the pressure,and reset the gauge,depress the bleed valve button(17).
The compression tester can now be unscrewed, and the next cylinder tested.
MAINTENCE:
Keep your compression tester clean.Ensure that screw threads do not become dirty.If necessary clean with a wire brush.
How To Use:
Remove all glow plugs and number the cylinders according to which they are removed.
Connect the correct adapter to the compressor hose and screw the compression tester into the glow plug or injector hole.
Disable fuel injection pumps, crank engines, until the pressure gauge reaches peak value, and note the number.
Push the release valve to release pressure, repeat for other cylinders, and compare readings.
Full Range Diesel Cylinder Test Gauge Pressure Gauge Tester Kit
Glow Plug Adapters: (Thread , Length)
M10x1.0:83mm
M10x1.0:91mm
M10x1.0 :102mm
M10x1.0 :113mm
M10x1.0:119mm
M10x1.25:64mm
M10x1.25:135mm
M12x1.25:47mm
M22x1.5 :118mm
Adapters for Injector: (Thread , Length)
M20x1.5:75mm
M22x1.5:73mm
M24x1.5:88mm
M24x2.0:63mm
Specifications:
Package Dimensions :14.8 x 10.71 x 2.91 inches;
Item weight:6.61 Pounds
Package Included
1x Compression Gauge
9x Glow Plug Adapters
4x Injector Adapters
1x H Fitting
1x User Manual
1x Carry Case