Feature(may vary by option.)

●Fits for 14 inch with Aspect Ratio 16:9 laptop -DIAGONALLY MEASURED 14” (Measured Viewable Display Area Diagonally, Corner to Corner Without the Frame), filter size(W x H): 12.2 inches (31cm) x 6.9 inches (17.5cm) --Measure your screen size as image 7 to avoid buying wrong
●Easy to use, no residue remove, Anti-glare matte technology effectively reduce the glare & visual fatigue
●100% compatible with a touch screen, maximize to restore the original touch accuracy
●Coated with hydrophobic and oleophobic layers against sweat and oil residue from fingerprints
●Including: screen protector x2, Gift Cleaning Cloth x1, Friendly customer service--for any product problems or not satisfied with it, please feel free to contact us

[14 Inch (Diagonal) - 16:10 Aspect Ratio]




[For 11.6-17.3 u201D Laptop Screen]





Description

11
11

Make Sure is the right size BEFORE BUYING

Correct measurement screen size, THIS MEASUREMENT IS CRITICAL

  • 1. Determine your screen type is a raised bezel or a flat front glass
  • 2. According to the screen type, measure your screen size
  • 3. Compare with screen filter size, filter size must be smaller than the screen

FORITO 14 Inch Anti Glare Filter Size

  • Diagonal Length: 14 inches (35.6cm)
  • Width: 12.2 inches (31cm)
  • Height: 6.9 inches (17.5cm)
  • Screen Aspect Ratio: 16:9
  • Please allow the protector size with a tiny difference

22

Enhanced Notebook Screen Anti Glare Filter

Product Feather:

  • Newest anti glare matte technology, efficiently reduce screen glare
  • 100% compare with a touchscreen
  • Anti scratch, oleophobic coating reduce screen smudges
  • Reduce UV rays and Light reflection

33

95% Transparency, not reduce the screen brightness

Why is the FORITO high transparency screen protector?

  • 95% Ultra Transparency Almost invisible
  • preserves the original screen brightness to reduce eye strain
  • No Need to increase screens brightness, Not reduce battery life

How To Use- 4 Steps Installation Guide

aa

ss

dd

ff

Completely clean the screen

Peel off one side of Tab 1, not too much about 2 inch (50 mm)

Start installation

From one side of the screen, make sure the film and screen are aligned

Slowly adhere

Slowly peel off the Tab 1 while adhering the filter with application

peel off Tab 2 film, it’s done!

If there are air bubbles during the installation, slowly tear open, eliminate the air bubbles and reinstall