How to replace a spire tire hoist ?
step 1: Lowering the Tire
Pull off the spare tire tools panel, Pull out the tire jack, Put the tire jack into the tire hoist, Turn the jack counterclockwise to lower the tire, If the secondary safety latch engages, press the tire up with a floor jack to release the latch
If the latch will not disengage, remove the hoist as described in Step 2
step 2: Removing the Tire Hoist
Remove the bolts that hold the hoist, Lower the tire and hoist, If you cannot remove the hoist normally, cut it off as described in Step 3
step 3: Cutting of the Hoist
Cut the secondary latch with a reciprocating saw or a torch, Cut off any stuck bolts with a torch, Remove the bolts from the hoist, Pull the hoist off
step 4: Replacing the Bolt Clips
Pry off the bolt clips with a flat blade screwdriver, Push the new clips into place, using a hammer
step 5: Installing the New Hoist
Lift the new hoist into place, Insert the bolts into the hoist, Lower the hoist cable with the tire hoist jack, Put the tire carrier through the tire, Raise the tire by turning the tire hoist jack clockwise, Put away the tire hoist jack, Close up the jack panel