Feature
●16 possible radio channels, Operate on Radio Frequency 433 MHz, 1 transmitter can trigger multiple receivers
●Up to 30 meters range
●Can trigger cameras wireless or wired
●Can wirelessly trigger the camera shutter under 5 modes: single shot, unlimited continuous shots, bulb shot, 3 continuous shots and 5 seconds delay shot. (Note: Its not able to control video start and stop)
●For Panasonic DMC-FZ2500,FZ2000,FZ1000,FZ1000 II,FZ300,FZ100,FZ150,FZ200,FZ20,FZ30,FZ50,S1,S1R,S1H,S5,G1,G2,G3,G5,G6,G7,G9,G85,GF1,GH1,GH2,GH3,GH4,GH5,GH5S,GH6,GX7,GX8, Replaces Panasonic DMW-RS1/RSL1 Remote
Description
This Wireless Remote is designed for cameras that has a remote shutter socket. The system works at a 433MHZ frequency and has 16 available channels. In addition, this wireless remote system adopts a technology to allow the transmitter trigger the receiver without direct line of sight up to 30 meters / 100 ft. The transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot/bulb lock.
Compatible with Select Panasonic Cameras:
DC-S1 / DC-S1R / DC-S1H / DC-S5 / DC-G9 / DC-GH6 / DC-GH5 / DC-GH5S / DC-FZ2500 / DC-FZ2000 / DC-FZ1000 / DC-FZ1000 II
DMC-G1 / DMC-G10 / DMC-G2 / DMC-G3 / DMC-G5 / DMC-G6 / DMC-G7 / DMC-G85 / DMC-GF1 / DMC-GH1 / DMC-GH2 / DMC-GH3 / DMC-GH4 / DMC-GX7 / DMC-GX8 / L1 / L-10 / LC-1 / DMC-FZ300 / DMC-FZ100 / DMC-FZ150 / DMC-FZ20 / DMC-FZ200 / DMC-FZ20K / DMC-FZ20S / DMC-FZ30 / DMC-FZ30K / DMC-FZ30S / DMC-FZ50 / DMC-FZ50K / DMC-FZ50S
Important - How to use:
1. Install the CR-2 battery to the receiver and 23A battery to the transmitter. (Make sure to remove the plastic protective paper on the battery before installation)
2. Set the receiver and transmitter to the same channel (Normally the channel is already matched when you receive the package, so actually you dont need to set it, but if you ever reset the channel, make sure they are the same)
3. Once the batteries are properly installed and the channels are matched, when you press the shutter button on the transmitter, both the LED bulb on the transmitter and receiver will light up.(If not, please check if the battery is installed correctly or the battery is dead)
4. Once the transmitter matches the receiver, connect the receiver to the camera via the camera connecting cable which is included in the package, then set the transmitter into the working mode you want and finally press the shutter button to take a photo wirelessly.
Attention Please: This remote does not work when camera is in movie mode, so it cannot control video start and stop!
|
|
|
|
|---|---|---|
|
1/4"-20 Screw Hole on Receiver The 1/4"-20 screw hole on the back of receiver allows you to mount the receiver on tripod or other devices with 1/4"-20 screw when camera without standard hot shoe or hot shoe is occupied. |
16 Channels, Easy to Pair This remote works at 433MHZ frequency and has 16 available channels. There are 4 different channel selectors on the back of transmitter and receiver, just need to push the channel selector in the same number and direction to complete the pairing. |
Package Includes Transmitter x 1 Receiver x 1 CR-2 battery x 1 23A battery x 1 Camera connecting cord x 1 |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Remote Shutter Release Cord | Wired Intervalometer Timer Remote | Macro Extension Tube | Camera Neck Strap | Clip-on Lavalier Microphone | Deluxe Hand Strap | |
| Customer Reviews |
4,251
|
43
|
740
|
315
|
27
|
460
|
| Price | $13.99 | $25.99 | $39.99 | $9.99 | $16.99 | $23.99 |
| Type | Remote Shutter Release Cord | Wired Intervalometer Timer Remote | Macro Extension Tube for Micro 4/3 Mount | Camera Neck Strap | Clip-on Lavalier Microphone | Deluxe Hand Strap for Mirrorless Camera |
