Feature(may vary by option.)
●【Dimensions】3/4" Thick x 4-½" Length x 3" Width. Accept customization, if you need other sizes, please feel free to contact us.
●【Professional Quality】Tapping block is made of heavy duty HDPE plastic.Has ultra-high abrasion resistance, corrosion resistance, impact resistance and moisture resistance.Our HDPE tapping blocks are built to last.
●【Many Uses】Tapping blocks help with floor installation, used to tap laminate into place, DIY handmade, easy to cut, easy to machine into parts, precision parts can be made using techniques such as CNC machining, bending and heat gun forming.
●【Various Sizes】Our tapping blocks are available in a variety of sizes and are professionally machined to cut to meet the vast majority of needs.
●【High-quality Raw Materials】Impact Resistant - Can be used as a substitute for wood and metal. Low moisture absorption - Suitable for outdoor applications, including plywood replacement applications.
[3 & 4 x17 x3 white]
[3 & 4 x4-1 & 2 x3 white]
[2 x15 x3 white]
[1-3 & 8 x12 x3 white]
[2 x12 x3 white]
[3 & 4 x15 x3 white]
[3 & 4 x12 x3 white]
Description
HIGH DENSITY POLYETHYLENE
HDPE is a highly crystalline, non-polar thermoplastic resin.
The crystallinity is 80%~90%, the softening point is 125~135 ℃, and the operating temperature can reach 100 ℃;
The hardness, tensile strength, and creep resistance are better than those of low-density polyethylene;
Good wear resistance, electrical insulation, toughness, and cold resistance;
Good chemical stability, insoluble in any organic solvent at room temperature, corrosion resistance;
The film has low permeability to water vapor and air, and low water absorption;
The aging resistance is poor, and the environmental stress cracking resistance is not as good as that of low-density polyethylene, especially due to thermal oxidation. Therefore, antioxidants and ultraviolet absorbers need to be added to the resin to improve this deficiency.
High density polyethylene film has a lower thermal deformation temperature under stress, and attention should be paid when applying it.
VARIOUS SHAPE OF PRODUCTS MADE OF HDPE PLASTIC BLOCKS
|
|
|
|
|---|---|---|
|
High density polyethylene has good heat and cold resistance, chemical stability, high rigidity and toughness, and good mechanical strength |
Good chemical stability, insoluble in any organic solvent at room temperature, corrosion resistance; Thin films have low permeability to water vapor and air, and low water absorption |
Dielectric performance and good resistance to environmental stress cracking |
MAIN FUNCTIONS
High density polyethylene resin can be used to form plastic products through injection, extrusion, blow molding, and rotational molding methods.
Various types of containers can be formed.
Various hollow containers, ultra-thin films, etc. can be formed by blow molding.
Extrusion molding can be used to form pipes, stretching strips, bundling strips, monofilament, wire and cable sheaths, etc.
In addition, it can also form decorative panels, louvers, synthetic wood, synthetic paper, synthetic films, and molded calcium plastic products for construction purposes
