Feature(may vary by option.)
●【Feature】This RV Stair Entry Step Motor can help the step automatically extend when you open the rv door and retract when you close the door. With an automatic shut-off function, if an obstacle is encountered during the stretch, the steps will be automatically retracted.
●【Fitment】RV Step Motor Fit For Kwikee Electric Step Series 22 23 26 28 30 31 32 33 34 35 36 37 38 39 40 and 41. Compatible with Triple and Quad Step Configurations. Fit for IMGL Motorhome RV Entry Step Motor Replacement Kit. Replace part number: 676061 366043 369506 1101428 379147 676061 2141001 1104425 Lippert Step Motor Components.
●【Reliability and durability】First, when open the RV door: Step extends automatically. Second, when close the RV door: Step retracts automatically. Third, when encounters obstacle: Step retracts automatically. Replacement The Following Vehicle - Fit for Kwikee. Fit for RV, Coach, Motorhome, Toyhauler.
●【High-quality products】The 676061 RV Entry Step Motor is made of high-quality heavy-duty aluminum materials, so it can stretch the step smoothly. Even in the rain, weatherproof wiring and connectors protect the motor against corrosion and short circuits, which greatly extend its service life.
●【Tips】100% brand new, 1 year warranty, ready to install out of the box. Check your RV Step Motor before ordering. Make sure you choose The Entry Step Motor is your need.
[676061]
[366043]
[379160]
Description
For Kwikee Electric Steps Series 22 23 26 28 30 31 32 33 34 35 36 37 38 39 40 and 41 RV Step Motor Replacement Kit and Lippert Motor Components
Installation
1. Before replacing, please disconnect the power supply of the steps.
2. Disconnect the power plug from the motor assembly.
3. Using a 10mm socket, remove the 3 screws holding the motor assembly.
4. Lower it straight down being certain not to drop the gear, washers and pin on the gear assembly side of the motor.
5. Move the washers, gear and pin to the new motor.
6. Apply new grease to the gear if needed.
7. lnsert motor assembly into gear box and insert the three screws.
8. Tighten the screws down with a 10mm socket.
9. Reconnect power plug to the motor assembly.
10. Reconnect main step power (four way connector) while staying clear of moving parts.
11. Test the step and finished !
|
|
|
|
|---|---|---|
FunctionThe motor controls the raising and lowering of the entrance steps of the RV. If the step hits an obstacle, the motor will automatically stop lifting. |
FeaturesEasy to replace your faulty RV step motor, plug and play, saving time and effort. |
Tread Lite Power StepTake your entryway game up a notch with Tread Lite Power Steps. These electric RV steps feature upgraded mechanics that allow the steps to automatically extend and retract faster and provide more stability and peace of mind. |
|
|
|
|
|---|---|---|
High QualityThe 676061 RV Entry Step Motor is made of high-quality heavy-duty materials, so it can stretch the step smoothly. |
Weatherproof ConnectorEven in the rain, weatherproof connector protect the motor against corrosion and short circuits, which greatly extend its service life. |
Used widelyThe 676061 step motor is widely used in Kiwikee/Lippert 2-Step and 3-Step. Get it and get your RV steps working again. |
Friendly reminder
1. This item just include the motor, not include the linkage parts, please confirm your need before the purchase.
2. Refer to the above steps to help you install, if you have any other problems, please message us at soon, we will provide you with the most professional proposal.
