Feature

●3:1 Shrink Ratio: Shrink tubing will become one-third of its original size when heat is applied, more resistant to stretching and vibration than regular heat shrink, and has more tensile strength
●Useful Sizes: Heat shrink tubing kit is between 3.2mm and 19.1mm in diameter, is frequently used size, no useless size
●Dual Wall Shrink Tube: Reliable and long-protected adhesive-lined heat shrink tubing consisting of two layers, waterproof and sealed
●Flame-retardant and Low Smoke: Electrical shrink wrap tubing is made of polyolefin and an inner layer consists of a meltable adhesive, that withstands temperatures of -67 to 257 degrees Fahrenheit (-55 to 125 degrees Celsius)
●Widely used: Heat shrink tubing is mainly used for electrical insulation of wires, solder joints, connectors, and terminals, heat shrink can also be used to prevent damage, strain relief, bundling wires, etc.


Description

There are many various kinds of heat shrink tubes, some of them are of worrying quality and cannot work after heating shrinkage; some of them have a lot of quantity, but the small size may account for 30%-40% of the total, do not be confused, for example, 1.6mm, 2.4mm heat shrink tubing, they shrink to less than 1mm in diameter, so these sizes are not used in daily life.

ALEKOR 3:1 dual wall heat shrink tubing sets are commonly used sizes, the smallest size is 3.2mm and the largest size is 19.1mm, exactly the size we commonly use in life, making every penny spent worth it. ALEKOR heat shrink tubing is the best option for wire insulation.

High Shrink Ratio Shrink Tube

For waterproofing connectors and wires, this ALEKOR 3:1 industrial heat-shrink tubing is one of the best solutions, it is more resistant to stretching and vibration than regular heat shrink and has more tensile strength, this allows for an extra tight fit that is hard to achieve with tubing that only shrinks to half its size (2:1).

A higher shrink ratio can be useful in applications where you need a tighter fit, or when you need to slide the heat shrink over a connector that is significantly larger than the wire that it is connected to.

Waterproof Dual Wall Heat Shrink Tubing

Adhesive lined heat shrink, also known as marine grade heat shrink, is made up of two layers. When adhesive-lined tubing heats up, the adhesive melts at the same time as the outer layer shrinks, adhesive flows into the small leftover cavities between the heat shrink and the object that is being sealed, after the tubing and adhesive have cooled down, is a watertight seal. Ideal for boat cars or hobby RC projects where splashing water is a frequent occurrence.