Feature

●🚙【Special machine for removing carbon deposits】HTS558 fuel system cleaning tool is a special machine for cleaning the carbon deposits on the intake pipe and the back of the intake valve of the automobile engine, which can deeply remove the high-viscosity carbon deposits on the intake manifold and intake and exhaust valves. After cleaning, the engine can be kept in a healthy state and ensure the efficient operation of the engine.
●🚙【Safe & Efficient】The Intake Pipe Valve Cleaner Machine uses walnut sand as cleaning agent. A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive. As an eco-friendly pure natural polish material, walnut sand has advantages of hardness, pressure resistance and wear resistance. It can clean the intake pipe and backside of the intake valve thoroughly without pipes damage and corrosion.
●🚙【Simultaneous injection and recovery】Walnut blaster special machine for cleaning the back of the engine intake pipe and intake valve. After closing the intake valve, the walnut sand is sprayed into the engine air intake through the air pump (not included), and the HTS558 recovers the walnut sand through vacuum. Because these two operations form a closed loop, walnut powder will affect the carbon deposition on the inner wall of the intake pipe.
●🚙【Easy to Operation】Turn off the engine before cleaning, then turn the crankshaft to close the intake valve, and use a high-pressure air pump (not included) to inject walnut powder (not included) into the intake port of the engine. The built-in dust filter of Automotive Engine Carbon Deposition Cleaner help to separate and recover walnut sand from carbon deposits, thus forming a complete cleaning closed loop.
●🚙【Integrated Design】The walnut sand of Walnut Blaster Kit for Carbon Cleaning can be sprayed and recycled simultaneously. Built-in dust filter can separate the recovered walnut sand grit from carbon deposits for recycling. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
●🚙【3 year warranty】For damage caused by non-human factors, we promise to resend parts for free within 3 years.


Description

11

WALNUT SAND DE-CARBON CLERNER

  • Automotive Walnut Sand DE-Carbon Cleaner is a advanced equipment for clean engine intake carbon deposition. Keeping engine in healthy status, make sure engine provide high quality power constantly.

  • Deep removal of carbon deposits: Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.（Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)
  • External air source: This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
  • Built-in dust filter: It can separate the recovered walnut sand grit from carbon deposits for recycling.
  • Integrated design: The walnut sand grit can be sprayed and recovered simultaneously.

  • Recommend:
  • Air pump pressure should more than 0.7Mpa (7bar/102PSI).
  • Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB).
  • Cleaning time between 1-3 minutes.

FUNCTIONS:

  • High Efficiency : When the high-pressure air flow and walnut sand are injected into the closed engine intake manifold, they will roll and collide rapidly inside, forming a closed loop of continuous injection and suction, so as to quickly remove the carbon deposits inside.
  • Safe and Undamaged : Walnut sand can deeply remove sticky carbon deposits on intake manifold, intake valve and exhaust valve without damaging them. Walnut sand residual in intake pipe will go to ashes at high temperature after engine cranking to avoid damaging automotive exhaust systems & parts.
  • Integrated Design : When the sprayed walnut sand impacts and deposits carbon, the walnut sand particles will be recycled in the equipment at the same time, without manual recycling, saving time and effort.
  • Built-in Filter Screen : Built in filter screen can separate the recycled walnut gravel from the carbon deposit for secondary utilization.
  • Practicality : The overall structure design is simple and light, beautiful and compact, and has strong practicability. With universal pulley, it can move 360 ° in all directions, which is convenient and labor-saving.
  • External Air Source Design : The use of external air source can provide continuous external power during the cleaning work, so as to promote the walnut sand particles to more strongly impact the carbon deposition in the pipeline, and more comprehensively complete the carbon deposition removal work.

11

Package include:

  • 1pcs x Walnut Sand DE-Carbon Cleaner Machine
  • 5pcs x Yellow Adapters suitable for various car models.(For GM, For Benz, For BMW, For Audi, For Land Rover.)
  • 2pcs x Spray gun
  • 1pcs x Goggles
  • 1pcs x Recycle hose
  • 1pcs x Recycle hose and spray gun connector

11

22

33

Car DE-Carbon Cleaning Experts

  • Carbon deposits lead to engine idling instablity, insufficient air intake,power down,acceleration weakness. HTS558 helps you clean the carbon deposits effetively restoring your car to a healthy engine.
  • It is a special machine for engine Intake pipe and intake valve back side clean. Close intake valve, then spray walnut powder into engine intake via air pump(not include), meanwhile HTS558 will recycle walnut powder by vacuum. This is a closed loop. Walnut powder will impact carbon deposition on inner wall of intake pipe. After thousands of impact, carbon deposition will be clear thoroughly.

Built-In Dust Filter

  • Automotive Walnut Sand DE-Carbon Cleaner Machine can separate the recovered walnut sand grit from carbon deposits for recycling.

Deep Removal Of Carbon Deposits

  • Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves.
  • It is specail for intake pipe and intake valve back side clean only, if you want to clean carbon deposition on injector/throttle valve/cylinder, please choose CT150,CT200 or C100. Walnut powder not include in package,please get it in local market; High pressure air pump is requirement(not include in package); Walnut powder residual in intake pipe will go to ashes in high temperature after engine start.

44

11

11

External Air Source

  • HTS558 Automotive Walnut powder engine Intake pipe valve clean machine enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.

INTEGRATED DESIGN

  • The walnut sand grit can be sprayed & recovered simultaneously.
  • Adapters suitable forvarious car models.

Specifications

  • Applications:All vehicle
  • Rated Voltage:110V/220V
  • Rated Frequency:50/60HZ
  • Capacity:13L
  • Rated Power:1200W
  • Vacuum Suction:0.02MPa
  • Air Flow:＜300L/Min
  • Package Dimensions:400*400*540MM
  • Weight:10KG

What is walnut powder(sand)?What is walnut powder(sand)?

What is carbon deposition?What is carbon deposition?

Why need to clean carbon deposition?Why need to clean carbon deposition?

What is walnut powder(sand)?

  • Crash walnut shell into powder, after a vigorous selection process then we get walnut sand.
  • It show high performance in the three area: hardness, anti-pressure, wear-resisting.
  • A large amount of pores on surface of walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.

What is carbon deposition?

  • Carbon deposit is the black gel caused by the repeated high temperature of the engine running, which is the residual rubber in the fuel injector, the throttle valve, the spark plug, and other components caused by insufficient combustion of the gasoline in the cylinder.

Why need to clean carbon deposition?

  • Carbon deposition will decrease the air-fuel ratio, cut down engine output power, and increase fuel consumption. All of them will damage the engine deeply. Generally, we need to clean the engine carbon after running for 2 years or driving to 4W kilometers. By removing the throttle, a carbon deposit can be seen clearly.

HOW TO USE?

11

11

11

11

STEP 1 :

  • Open head cover of HTS558 Automotive Walnut powder engine Intake pipe valve clean machine and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover.

STEP 2 :

  • Join spary gun muzzle and recycle hose together (there is a hole on recycle hose).

STEP 3 :

  • Remove intake manifold of engine, plug spray gun into intake, turn crankshaft to close intake valve. Connect high pressure air pump (not include) to HTS558 Walnut Sand DE-Carbon Cleaner Machine.

STEP 4 :

  • Connect AC power, start clean. The process should last 1-3 minutes (depending on carbon deposition circumstances).Close HTS558, check up cleaning result. Normally, walnut powder can be reuse 5-10 times (depending on carbon deposition. circumstances)

Product information