Feature(may vary by option.)

●[Specification] Each Mat Size: 400x250mm / 15.75x9.84(L*W), Total Coverage Area: 18 sqft, Thickness: 2mm / 80mil, Number of sheets: 17 pcs. Roller is not included.
●[Butyl Material] Made of durable butyl rubber vibration dampening material with aluminium foil, waterproof.Help to make your car stay cooler in the summer and warmer in the winter.
●[Funtion] Automotive Sound Deadener Mat, Noise Insulation and dampening Material, High Noise Reduction , Thermal Insulation Properties , Non-flammable , Flame Retardant.
●[Easy to Cut and Install] The sound dampening material comes in handy size which make it easier in terms of cutting and installation process! Automotive self adhesive insulation, every insulation pad is high temperature resistance.
●[Widly Used] Sound Deadener Deadening Insulation Material, Wide range of applications: Exterior Bulkhead ,Firewall ,Hood , Engine Compartment , Engine Bays ,Boot ,Wheel Arch ,Body Panels , Load Floor ,Under Seat Floor Interior Bulkhead. Also for under floor applications as it has great load resistance properties.

[36sq.ft]




[25sq.ft]




[18sq.ft]





Description

sound deadening matsound deadening mat
sound deadening matsound deadening mat
SOUND DEADENING DAMPENING MATSOUND DEADENING DAMPENING MAT

Description:

  • Made of butyl material for heat resistance.This material eliminates vibrations, reduces general noise and rattle of the vehicle allowing for higher comfort.
  • Self-adhesive sound dampening material,it is easy to install.
  • It is desined in handy size which make it easier in terms of cutting.
  • Block transmit sunlight, engine, exhaust pipe heat to the cab, reduce air conditioning energy consumption.

Installation:

  • Decide what part you want to insulate first: car roof,car floor,car doors or a hood.
  • Remove the remains of the factory insulation once you have dismantled the interior.Properly clean and degrease the surface prior to installation of mat.
  • Measure the pre-cleaned surface of the prospective spot that you are going to treat.
  • Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper.When your sheet is ready to used,lay that down to the surface and let is glue.Flatten the sheet with hands to avoid air bubbles.Use a roller for rolling down the foil as a neat step.

Looking for specific info?

Product information