Feature

●【Perfect Compatible Models】✅Replacement SRV7000-659 Convection Blower for Pelpro PP60, PP60-B, PP60B, PP60-RF Pellet Stoves. ✅Replacement Distribution Fan SRV7000-659 for Pleasant Hearth PH50CABPS, PH35PS, PH50PS, PH50CABPS-B, PH35, PH50, PH50CAB, PHCAB50PS, 50CABPS Pellet Stoves. Replacement For Part Number: SRV7000-659, SRV7000-659M, PH-659
●【What You Will Get】Aftermarket SRV7000-659 convection blower distribution room air fan assembly. This blower assembly comes with a 1 year manufacturer warranty. Any questions please contact us.
●【Why Do You Need To Replace A New Blower】The original pelpro pp60 convection blower was wearing out after years and made a LOUD SQUEAK every time it was used, stove was not burning great and you old fan was causing the stove to overheat. The new pp60 pellet stove convection blower replacement will give you a 100% improvement, that will have your stove running better and QUIETER, give a good burn, saving you time and money on your heating costs.
●【100% Ball Bearing Blower】The bearing type of this convection blower distribution fan srv7000-659 is 100% sealed ball bearing blowers, which is last longer and outperform cheaper sleeve bearing blowers. Sealed ball bearings require no additional maintenance, are less prone to the effects of heat, and will operate more quietly over their full lifetime.
●【Technical Specifications】Volts 115, Cycles 60Hz, Amps 0.9, RPM 2400. Two Wire Hook Up with 1/4" Male Spade Ends. Overall length is approx 17-1/2" Length. Length without motor is approx 14-1/2".


Description

This is a 115V AC sealed bearing motor with electrical terminals on the motor for installation, no lubrication is required. Simple installation, make sure your stove is unplugged from the wall while installing. Replacement Convection Blower for PelPro & Pleasant Hearth pellet stoves. Replacement for part number: SRV7000-659, SRV7000-659M. Fits the following models.

For Pelpro pellet stoves models: PP60, PP60-RF, PP60-B

For Pleasant Hearth pellet stove models: PH35, PH35PS, PH50, PH50PS, PH50CAB, PH50CABPS, PH50CABPS-B, PHCAB50PS, 50CABPS

Convection Blower Features:

-1 Year Warranty

-Exact Replacement Part

-100% Sealed Ball Bearing Motor

-The blower comes with both rubber grommets on both ends where the bearings ride

Suggested:

-Recommended to clean fan paddles every season- use a dry paint brush or compressed air with the blower removed.

-Recommended to clean the blower fins annually to remove any dust or debris.