Feature(may vary by option.)

●MKS SERVO42D closed-loop stepper motor drive is independently developed to meet market demand. It has a pulse interface, built-in efficient FOC algorithm, high-precision configuration, and effectively prevents motor loss of step through position feedback. Suitable for applications such as 3D printers, engraving machines, writing machines, automation products, and electronic competitions. Only Suitable for Nema17 series stepper motor use.
●Support 6 working modes: pulse interface (open loop, closed loop, FOC mode), serial interface (open loop, closed loop, FOC mode); Support CAN interface;Support MODBUS-RTU communication protocol;Support curve acceleration and deceleration;Support limit switch to return to zero; Support speed mode, relative position and absolute postion control mode.
●Support 1~256 arbitrary subdivision, support arbitrary working current setting; Support multiple motor synchronous working modes; Single slave communication doesnt need 120ohm terminal resistor
●Aluminum alloy shell, Effective heat dissipation, Continuous high current operation of the motor is more stable. NOTE: if the (STP/DIR/EN) signal high level is 3.3V, the COM must be 3.3V. if the (STP/DIR/EN) signal high level is 5.0V, the COM must be 5.0V
●Package: 1 sets parts as the picture picture shows (motor is not included here, please know before ordering)

[CAN]

[RS485]

Description

Support CAN interface;Support MODBUS-RTU communication protocol;Support curve acceleration and deceleration;Support limit switch to return to zero; Support speed mode, relative position and absolute postion control mode;