An affordable way to media blast parts without taking up much room in your shop
- Affordable way to media blast at home
- Space efficient bench top design
- Durable powder coated cabinet
- Holds up to 25 lbs of blast media
- Holds up to 50 lbs of parts
- High quality gun with replaceable tips
- Needs just 10cfm @ 80psi
- 19in x 15in window lens
- Full window sized tear offs
- Fits in just 24in x 20in space
The smart, space efficient design of this bench top media blasting cabinet really can’t be beat. The whole hinged top of the cabinet is both the access door, and the view window. This gives you much greater access to the inside then even some full sized cabinets. Meanwhile, you look down at your work through a big 19 inch x 15 inch screen, with full sized tear off protection (5pk #30770). Dust control is handled by hooking up any shop vacuum to the cabinet, or use it in a well ventilated area with no vacuum. The whole cabinet will take up just a 24 inch x 20 inch space in the corner of your work bench. That means you have nearly 3 cubic feet of work space to blast in. Just about any shop compressor can run it too; it needs just 10 cubic feet per minute at 80 pounds per square inch. The included high quality gun will work with a variety of media, and has replaceable ends for years of usage. Use with 60 grit or finer blast media.
- Electrical current requirement (lamp): 120 Volt AC, 60hz
- Air supply requirements: 10 CFM @ 80 PSI
- Internal Dimensions: 22” wide x 18” deep x 12” high
