Feature

●1.【WIDE RANGE OF APPLICATIONS】:12Pcs double rubber sealing gasket, Silicone Raw Material Belt, Silicone Gasket Seal, without raw material. Suitable for toilet shut-off valves, sink shut-off valves, dishwasher valves and potable water supply valves with an outside diameter of 1/2 and 3/4".
●2.【TWO SIZES, TWO COLOURS】:Two sizes, two colours: tap washer set includes sizes: 1/2, 3/4, red and green, made of plastic, not easy to corrode, a full range to meet your different size replacement needs.
●3.【DIRECT ACTION】:replace the original tape. faucet sealing rubber washers are suitable for most bathroom or outdoor faucets with wear and tear leaks, for faucet repair and replacement.
●4.【MATERIAL】:PVC material. Heat insulation, good stability, durable, smooth surface, bright colour, better prevent leakage. General cold and hot, can use domestic water within 100 degrees. The double rubber design and the gasket without raw materials ensure good sealing performance and prevent leakage.
●5.【STRONG SEAL】:After the test, there was no leakage in the water pressure of 66.14 pound Easy to install and connect, replace old seals to improve sealing performance. Used with toilet shut-off valve, sink shut-off valve, dishwasher valve and drinking water supply valve.


Description

Waterproof Gasket Plug

aa

Two sizes, two colours

Tap washer set includes sizes: 1/2, 3/4, red and green, made of plastic, not easy to corrode, a full range to meet your different size replacement needs.

Good sealing, freeze-resistant and high temperature-resistant.

aa

aa
3/4INCH

3/4inchWaterproof Gasket Plug For use with 1/2inch connectors only

Installation requires 3/4inch fittings to have a slot.

Leak-proof pads must be placed flat during installation.

  • Save time and labour

1/2INCH

1/2inchWaterproof Gasket Plug For use with 1/2inch connectors only.

National standard calibre, suitable for a wider range

Can replace the raw material belt, liquid raw material belt, easy to install

Widely used in indoor toilets, bangle valves, faucets, kitchen bangle valves, etc Threaded free of raw material tape sealing.

  • Installation requires 1/2inch fittings to have a slot.
  • Leak-proof pads must be placed flat during installation.

aa

aa

aa

aa

Step 1

There are two silicone gaskets on top of the cylinder.

Step 2

Both gaskets can be removed separately

Step 3

One can be removed when not needed

Step 4

For thicker sizes, a gasket is required.

aa

aa

aa

Step 1

Prepare the angle valve and plumbing leakproof gasket.

Step 2

Put the plumbing gasket into the inner teeth of the pipe according to the picture.

Step 3

Press the angle valve into the swivel and turn it until it is tight.

aa

Suitable for a variety of scenarios, high temperature and odourless

Made of silicone, PPR new material, durable and long-lasting