Feature

●【Package Contents】[1x] LED Emergency Exit Light Set
●Fully Automatic Operation
●Compact and Low Profile Design
●V-5 Flame Retardant
●12 LED per each head, 120/277 V Operation
●Battery Backup Operation


Description

EL5C12-1_Emergency LightEL5C12-1_Emergency Light

eTopLighting LED Emergency Exit Light

Ideal for commercial, and industrial facilities where economy, appearance, and the ultimate ease of installation and maintenance are desired, also solid-state electronics offer both reliability and low-cost performance.

Battery Backup Operation

  1. Apply AC power to the unit, the LED indicator should turn RED
  2. After the battery has been left to charge for 24 HOURS, test the unit by pushing the switch. The indicator turns OFF and it stays ON.
  3. When the switch is released, the LED turns OFF, and the indicator turns back to RED

  • Completely Self-Contained
  • Fully Automatic Operation
  • Compact and Low Profile Design
  • V-5 Flame Retardant
  • 120/277 V Operation

SAFE GUIDELINES

  • Do not use outdoors
  • Equipment should be mounted in locations and at heights where it will not be subject to tampering by unauthorized personnel
  • Do not mount near gas or electric heaters
  • The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition
  • Do not use this for other than its intended use
  • Installation and servicing should be performed by qualified personnel
  • Disconnect AC power before servicing
  • Never connect components under load
  • Do not mount or support these fixtures in a manner that can cut the outer jacket or damaged wire insulation
  • Unless individual product specifications deem otherwise; Never connect a LED product directly to dimmer packs, occupancy sensors, timing devices, or other related control devices LED fixtures must be powered directly off a switched circuit
  • Unless individual product specifications deem otherwise; DO not restrict fixture ventilation. Allow for some volume of airspace around the fixture. Avoid covering LED fixtures with insulation, foam, or other material that will prevent convection or conduction of cooling
  • Unless individual product specifications deem otherwise; Do not exceed the fixtures maximum ambient

WARNING

  • Always turn off AC power to the equipment before servicing
  • Servicing should be performed only by a qualified service technician
  • Use only manufacturer-supplied replacement parts

BATTERY

The battery supplied with the EL model requires no maintenance. However, it should be tested periodically and replaced when it no longer operates the connected sign for the duration of a 30-second or 90-minute test. The battery supplied in this sign has a life expectancy of 5 years when used at a normal ambient temperature of 72° F