Feature

●Lead Free Brass- Meets all federal & state standards for lead levels in drinking water system components
●3/4-Inch IPS Isolator Tankless Water Heater Service Valves 500WOG, colored valve handles for easy identification of hot and cold valves
●Include a residential pressure relief valve (150 PSI/500,000 BTU)
●Certified by CSA Group
●Easy to Install


Description

PP

TANKLESS WATER HEATER ISOLATION VALVE KIT WITH PRESSURE RELIEF VALVE

  • For Fast,Easy installation and service of Tankless water heaters
  • HYDRO MASTER 3/4" Tankless Water Heater Valve Kit (hot and cold isolation valves+pressure relief valve). All in one set, universal 3/4" size is suitable for most U.S. residential usage,easy and fast installation.

11111111

INSPECTION

  • HYDRO MASTER islatioin kit is made from heay duty and lead free solid brass which meets the lead free requirement of Federal and State and manufactured in an ISO 9001 accredited facility.We did 100% inspection in factory to make sure the quality.
  • HYDRO MASTER isolation kit involves hot and cold valves with 1/4 turn red and blue handles for easy identification. One-piece forged brass body, improved integrated design to reduce the chance of leaks. And the integreated drain valve with brass safety cap providing easy maintenance, it also has full port ball valve for better flow rate.
  • End connections comply with the following specifications
  • Female NPT: ANSI/ASME B1.20.1
  • Hose threads: ASME B1.20.7

55

MAINTENANCE

  • HYDRO MASTER 3/4" pressure relief valve is ASME rated to150PSI and 500,000 btu/hr, with end connection meet the request of NPT: ANSI/ASME B1.20.1
  • At least once per year the water heater Owner must manually operate this valve to ensure waterways are clear.
  • Before lifting the lever, check to see that the dis-charge line is securely attached and properly in-stalled to prevent injury or property damage.
  • Avoid contact with the hot water dis-charged during the test to prevent personal injury.
  • At least every three years this valve should be in-spected by a licensed plumbing contractor or qualified service technician and replaced if necessary.
  • lf discharge occurs during normal operation CALL A PLUMBER IMMEDIATELY. Discharge indicates an unsafe temperature or pressure Condition or a problem with this valve.

P-1P-1

P-2P-2

66

  • Clean brass meets Federal and State standards for lead free in drinking water system components.

  • 1/4 Turn colored coded lever handle.
  • The handle will not hit the wall behind the water heater when the valve be opened and closed

  • Drain valves with linked cap,3/4" NH thread.
  • Two extra rubber union gaskets in the box for replacement when neccessary to replace.
  • Extra teflon PTFE thread seal tape.
11111111

How to fix some small problems

During transportation, some spare parts in the valve kit may become loose, and water leakage may occur after installation.

Packing nut loose

Removing the handle from the valve,use the appropriate-size wrench to turn the packing nut one -quarter turn to tighten it.

22222222

How to fix some small problems

During transportation,some spare parts in the valve kit may become loose,and water leakage may occur after installation.

The gasket in the union nut loose

Take out the gasket in the union nut,and put the inner gasket in the middle of convex groove,and then screw into the union nut tighten.

111 222 5
Click here Click here Click here
Customer Reviews
4.6 out of 5 stars
2,677
4.4 out of 5 stars
35
4.4 out of 5 stars
92
Price $59.98 $99.99 $15.99
Brass Brass Brass
1 Set 1 Set 1 PC

Product information