Feature

●This 12 LED mist maker can add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology. You can put it in your pond, rockery, fish tank, vase, birdbath, etc. Then it will create a magical atmosphere
●The atomizing slice is consumable, and its service life is?3000 hours. If marked reduction of Mist present, please clean atomizing slice with a cotton swab (dont need to use any detergent).Keep it clean
●Please switch off the power before Movement or maintenance
●Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
●Dont touch the atomizing slice while the Mist Maker is working.

Description

Note: The upper part of the nozzles(the injection mouth) should be immersed in water and no less than 2-3cm. Please do not use pure water and other non-oxygenated water to run this product

Features:

Brand new and high quality.
No heat or chemicals used.
Easy to operate, put in the water and the voltage is 17V, then the mist appears.
Ideal for indoor or outdoor fountains, water feature, and office use.
With 12 LED (4 red + 4 yellow +4 blue) light, different color group LEDs lights up alternately.
Mist Maker Size: 4.6cm(diameter) * 27.5cm(height).
Disc: 1.5cm.
Output Voltage: 17V DC.
Cable Length: 210cm (82inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter.
(1inch=2.54cm)
With a US AC/DC adapter.
Input: 110-250V, 50/60Hz
Output: DC 17V, 800mA

Points for attentions:

Do not turn over the Mist Maker When the switch is turned on, keep upright, or it may damage the atomizer.
Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.

Package Content:

1 x Mist maker
1 x AC-DC adapter Note:The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles Please do not use pure water and other non-oxygenated water to run this product