How to Apply

Before using InstaFix for ponds, ensure that water is well aerated via waterfall, fountain, or other method to prevent fish loss. Aeration must be continuous. During warm weather with high water temperatures, vigorous, 24-hour aeration is required. High water temperatures cause more rapid decay of dead algae, which can cause fish distress. When algae is treated, it may cause oxygen levels to drop to harmful levels if adequate aeration is not provided.

Heavy Algae Growth: It is highly recommended to remove excess algae prior to your treatment. Removing excess algae will produce better results with less treatments while reducing decaying organic matter, resulting in less oxygen loss.

Formulated for Fountains, Small Ponds with Goldfish & Koi: InstaFix Algae Control can be used in water features that have no outflow after treatment.

Use 1 oz of InstaFix pond cleaner per 360 gallons of pond or fountain water. Pour evenly around the pond edges or into an area with the greatest circulation. DO NOT use more than the recommended dose. For best results, remove excess algae prior to treatment. Wait a minimum of 3 days between treatments. Repeat dosage once per week for maintenance. Before using InstaFix Algae Control, make sure your pond has vigorous aeration such as a fountain, waterfall, or aeration device. Without aeration, your fish may be at risk due to decreased oxygen levels, especially during the warmer months. Once algae is under control, we recommend following up with The Pond Guy Clarity Defense treatment to reduce excess phosphates.

When to Apply

Apply InstaFix pond cleaner to treat existing algae growth or once per week for maintenance.

Restrictions

Do not use InstaFix pond cleaner with snails, shrimp, clams, and other crustaceans or mollusks.

FAQs

Can I use double the dosage to get quicker results?

No, we only recommend using the amount listed on the product label. Using more than directed will not speed up the results and can be harmful for the pond.

How often should I apply this product?

For best results, apply once every three days for a total of three treatments. Wait a minimum of 3 days between treatments. Then apply weekly for maintenance as needed. Do not use more than the recommended dose. It may be necessary to add additional treatments depending on the severity of the algae bloom.

Can I use InstaFix at the same time as I use my beneficial bacteria?

No, we recommend waiting at least 72 hours before adding any beneficial bacteria products to your pond.

Is this product harmful to birds that drink and bathe in the pond?

No, when used in accordance with the label and dosage rates, InstaFix will not harm birds or wildlife that visit your pond.

Is this product safe for use in ponds containing snails?

No, InstaFix is not recommended for ponds containing snails, crustaceans, or mollusks.

Will this algae remover harm my fish? InstaFix Algae Control can be used in ponds that contain fish. Always use in accordance with the label directions. Do not use InstaFix Algae Control with snails, shrimp, clams, and other crustaceans or mollusks.

Can I get rid of algae without hurting my water lilies? InstaFix Algae Control will not harm ornamental plants when used as directed.

Does InstaFix Algae Control work without aeration? It is recommended to use InstaFix Algae Control with aeration, such as a decorative fountain, waterfall, or bottom diffused aeration. Without proper aeration, your pond fish may be at risk due to decreased oxygen levels, especially during the warmer months.