Feature

●Compatibility: For use on 2005-2011 model year GM Duramax 6.6L engines.
●FUNCTION: For a simple repair or the most complex drivability concern, 6779 Injector Puller solve problems faster, and at better value. Safely pulls the injectors from the cylinder heads without pulling the injector cups.
●Superior Quality: Made of strong high-grade heavy-duty steel with black oxide finish, durability, impact and wear resistance, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.
●Nice Design: Safely pulls the injectors from the cylinder heads without pulling the injector cups and without causing damage to the injector body.
●Easier Work: Replace Kent Moore J-44594. 1. Simply insert the tool into the injector retainer bracket bolt hole. 2. Attach a socket and ratchet/breaker bar to one of the hex ends. 3. Start rocking back and forth - the injector will pop right out.


Description

QualityQuality

  • Superior Quality — Advanced heavy duty steel with black oxide finish, durability, impact and wear resistance, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life

FitmentFitment

  • Fitment: Compatible with GM Duramax 6.6L engines 2005 2006 2007 2008 2009 2010 2011.

ReplacementReplacement

  • Replacement: Replace 6779, alternative to Kent Moore J-46594.

Package IncludesPackage Includes

Upgrade DesignUpgrade Design

Detail InstallationDetail Installation

  • Package Includes 1X 6779 fuel injector puller

  • Upgrade Design — Safely pulls the injectors from the cylinder heads without pulling the injector cups and without causing damage to the injector body.

  • Detail Installation Step 1: Disconnect the fuel injector electrical connectors. Step 2: To assist with disassemble the fuel injector pipes, apply lithium grease between the fuel injection pipe and the accessories. Step 3: Disconnect and reposition the fuel return pipes. Step 4: Remove the fuel injector bracket bolts. Step 5: Install the 6779 injector puller into the bolt hole of the fuel injector bracket. Step 6: Install a wrench onto the 6779 injector puller. Turn the wrench away from the injector until the injector loosens from its base. Step 7: Remove the 6779 injector puller and install on another injector. Repeat steps 5-7. Step 8: Reinstall the fuel injector bracket bolts and return pipes. Reconnect each injector electrical connectors. (To prevent possible severe damage to the engine, please make sure the injector electrical connectors are connected correctly.)

Product information