Feature
●[Size] Catch can: capacity: 750ml; The thread size of 10an is 7/8-14 UNF; Bottom drain valve thread is 3/8 NPT. 10AN fuel hose: ID: 0.56"(14.22mm); OD: 0.78"(19.8mm); Length: 10 feet.
●[Universal] Oil catch can kit be applied to most cars. Please make sure you have enough space in your car before installation.
●[Material] Oil catch can is made of aluminum alloy. Fuel line is made of CPE, stainless steel and nylon braid.
●[Parameter] Working pressure : 500PSI. Burst pressure: 2000PSI. Operating temperature: -40°F to 257°F. Minimum bending radius : 101.6mm.
●[Feature] A drain valve at the bottom of the oil catch can makes it easier to clean and reuse. Thread come with o-ring gasket to prevent oil leakage
Description
-
-
10AN Oil Catch Can
Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation, keep engine clean.
-
Nylon Braided CPE Fuel Hose
Made of CPE synthetic rubber and nylon braided.
-
AN Swivel Hose End Fitting
The swivel fitting is only work with stainless braided and nylon braided hose .
-
Oil Catch Can with Breather Filter
Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.
-
Coolant Overflow Tank
The top is designed with a 1/16 vent hole for ventilation.The coolant overflow tank as a storage container regulates the pressure generated by the heat of the engine.