Feature

●Caster socket for caster with 7/16" diameter stem up to 1-1/2" long. Please make sure your caster or glide has a stem with 7/16" or 11mm diameter as in picture 2 or it wont work.
●4 pack. Please measure correctly before you buy. Dont eye ball it. Use something accurate to measure. The tube needs to be 1" outside diameter and 7/8" inside diameter in order for it to work perfectly.
●Caster socket to go into 1" OD round tube 16 gauge.
●It fits 7/8" diameter hole. Made in Taiwan. The outside diamter of this is 7/8".
●Thick wall to last for years of use.


Description

This item is to go in between a metal tube and a caster or a glide.

Please make sure the follwing before ordering to save you time and money.

1. You will need a caliper to measure correctly. Eyeballing it will not work because it may be too loose or too tight to work properly.
2. Your metal tube needs to be 1" outside diameter with 7/8" inside diameter (1" outside diameter with 16 gauge thickness). Its a heavy thickness tubing. Most low end carts dont use heavy gauge tubing.
3. Your caster or glide need to have a 7/16" or 11mm diameter stem with a ring near the top, please refer to the photo above. The lenght of the stem on it can be up to 1-1/2" long.

Thank you for considering this item and search Oajen for other fine furniture hardware.