![Oil Drain Plug](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
Installation Method:
1. Clean the oil pan before installation, making sure the area and threads are free of excess oil and contaminants.
2. Thread the piggyback plug into the hole, turn it forward a few times, then backward a few times.
3. Once the plug is bottomed out, remove it and clean any iron filings around the punch hole
4. Using a T-wrench, tighten the plug to approximately 14ft-lbf.
5. After installing the return plug, screw on the small return plug and the installation is complete (Note: When removing the small return plug, make sure the large return plug is in a fixed position).