Feature

●[DIGITAL FLOW METER] - The fuel gun nozzle with digital flow meter can measure the flow of pipeline fluid.
●[PROFESSIONAL DESIGN] - Well designed gun nozzle is resistant to oil dropping or leaking, with small size, accurate measurement, and simple operation.
●[FOUR UNITS] - Our fueling nozzle provides four units of liter(LTR), gallon(GAL), pint(PT), quart(QT). When changing unit, press and hold (CALIBRATE) button for 5 seconds, the digits on display will flash from left to right; press (DISPLAY) to move to the last position, unit will flash from top to bottom, then press (CALIBRATE) to select unit.
●[APPLICABILITY] - The fuel meter nozzle is a great oil filling equipment for factories, gas stations, etc. The oil nozzle is used for filling fluid such as , kerosene, gasoline.
●[WARM PROMT] - For the most accurate reason, before using, make sure there is no air in the system and meet the meter’s minimum flowrate requirements.


Description

Specifications:

Model: AC-15A

Material: Aluminum

Nozzle Size: 1"(25mm)

Flow: 4.5m³/h

Pressure: 0.25MPA

Suitable Fluid: , kerosene, gasoline

Weight: 1415g(approx.)

Instruction:

1. Two buttons; (CALIBRATE) and (DISPLAY)

2. Standby state: standby state is low power consumption state; when there is measurement pulse input, it will display real-time filling quantities.

3. Measurement range is 9999.9, if over this range, it will automatically reset to zero.

4. Real-time filling amount reset: Press (DISPLAY) button to reset real-time quantity to zero. Cumulative quantity reset: take out battery, and when put battery back in, press and hold (DISPLAY) to reset cumulative quantity.

5. The default unit of real-time measurement is Liter (LRT).

6. At standby state or when it shows real-time filling quantity, press (CALIBRATE) to display cumulative filling quantity.

7. Release (CALIBRATE) button or when there is measurement pulse input, it will return to display of real-time filling quantity.

Maintenance and Care:

1. This flow meter requires a battery capable of operating for at least 9000 hours (1 year) as a power source.

2. Short battery life can cause damage to this flowmeter due to battery leakage during operation, it is recommended that customers replace the battery every year.

3. If the LCD display of this flowmeter becomes dim or Lbat indication appears, it should be replaced in time.

Package Includes:

1 x Oil Gun Nozzle

1 x Connector

Note:

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.