Do many cable boxes, A/V receivers, media players, or other IR-controlled equipment confuse your entertainment center? If you only have a short distance to move them to a closed position, but this prevents you from using them with a remote control, using CERRXIAN Infrared Remote Control Extender Cable cable is the ideal solution to your problem!
Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor; Route the infrared remote control extender cable out of sight with a wall mounted TV; Install the IR Transmitter end in a concealed equipment closet to hide a catv box and control it remotely.
Specifications:
1.Connector Type: IR Signal Receiver x1 & IR Emitter x1 & USB x1
2.Receive Frequency Range: 20KHZ to 60KHZ
3.Receive Range: 10m/32ft
4.Emitters Range:10cm/3.9inch
5.Cord Length (USB to IR Receiver): 1.4m/4.5ft;
Cord Length (IR Receiver to IR Emitters): 2m/6.5ft
6.Signal receiving angle 180°
7.USB output: 5V
8.LED flashes to confirm signal reception
HOW TO USE:
1.Plug the USB into your TV, set top box or a 5V USB wall adapter(adapter not included) for supply power.
2.Paste the IR emitter(small end) on the signal receiver window receiving point of the appliances(up to 10cm/3.9inch).
1.Stick the IR receiver(big end) next to TV screen (Not on the screen) orin the line of sight of your remote control (up to 10m/ 32ft).
4.Check the battery in your remote
Important Notes
Test the cable before attaching with the adhesive backing
Check that the USB TV port provides 5V USB power or use a USB wall charger
Not compatible with a set-top box using (RF) radio frequency signals
Bright sunlight or CFL light bulbs can cause interference