Surfaces must be clean, dry and dust free. Remove any old mold and allow to dry prior to use.
|
Remove the cap and squeeze the Grout Cure tube until the product is expelled. Continue squeezing and apply in a zig-zag pattern to the grout line, ensuring even coverage and adequate bonding to the existing grout.
|
Allow to dry for 3-4 hours then remove any excess product from tiles with a damp cloth or sponge. Any residue remaining on tiles can easily be removed by moistening; leaving for 15 minutes then removing as above.
|
A second application may be necessary for badly stained areas; after first coat is dry (3-4hours). After removal of residues; polish tiles with a clean dry cloth. Avoid wetting tiles for 24 hours after application. Rinse applicator sponge in warm water after use and replace cap to enable product to be used again.
|