Step 1: Clean the tailpipe surface. - Clean off dirt and sand on your tailpipe using penetrating oil and a shop rag. (Make sure your tailpipe is room temperature. Do not clean surface immediately after the car stalls).
|
Step 2: Slide the exhaust tip into your tailpipe.T - Try to slide the exhaust tip into the tailpipe. When sliding, you may encounter some resistance. If necessary, use automotive grease to lubricate the pieces. Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.
|
Step 3: Fasten/weld the exhaust tip. - Secure the exhaust tip by tightening screws and clamps. To make even tighter, weld a joint between the edges of the tailpipe and exhaust tip.
- Installation is complete.
|