Feature(may vary by option.)
●For use with 3.5, 5, 6, 7 Gallon 12" Plastic Utility Buckets and Pails
●Easy pouring Rieke Flexspout spout for less mess and less contamination | SBR Rubber Gasket to prevent leakage | Spout stows when closed and recessed lid provides stacking stability; Reinforcing ribs provides stacking strength
●Tight Snap-on fit requires dead-blow hammer or rubber mallet to apply and must be pryed off to remove
●The lid is really not meant to come off. Consider it semi-permanent single use. It does NOT have tear strips
●FDA Food Contact Compliant, Recyclable HDPE plastic. Tamper evident seal allows pouring with confidence AND secure transport.
●Great lid for mixed commercial paints and stains to assist with pour out and filling smaller containers
●RECYCLING: Recycled Content: 0% Recyclable #2 Content: 90+%
[Red]
[White]
[Yellow]
[Black]
Description
NetSellsIt 3.5, 5, 6, 7 Gallon Plastic Snap-on Pail Lid w/Pour Spout HDPE (High Density Polyethylene) Bucket Top
This lid fits the 3-1/2, 5, 6 and 7 gallon buckets and must be put on the bucket with a mallet for it to go on properly. The lids are slotted to provide tamper evidence. Some or all of the areas directly below the slots around the rim will have to be broken or cut to remove the lid. While the covers can be reused, you will be able to tell that the bucket has already been opened after the first time it is taken off. This lid is recessed for stacking stability and it has reinforced ribs to provide stacking strength.
|
|
|
|
|---|---|---|
|
Tight snap-on fit requires dead-blow hammer or rubber mallet to apply. |
FDA food contact compliant, recyclable HDPE plastic. Tamper evident seal allows pouring with confidence and secure transport. |
HDPE (High Density Polyethylene) Reinforcing ribs provides stacking strength SBR rubber gasket to prevent leakage Easy pouring Rieke Flexspout |
|
|
|
|
|---|---|---|
|
Outside Diameter at Widest Point: 12 3/8 inch Thickness: 90 mil Weight: .33 lbs |
Spout Inside Diameter: 1 1/4 inch Recessed lid provides stacking stability; Reinforcing ribs provides stacking strength |
Spout Height: 1 5/8 inch Easy pouring for less mess and less contamination | Rubber Gasket to prevent leakage |
