Feature(may vary by option.)

●Extended Length Toolholder: 1" diameter shank and 12" length for deep boring capabilities.
●Quality Carbide Inserts: 10 CCMT32.5 black and yellow carbide inserts with advanced CVD coating.
●Efficient Cutting Profile: Features a negative 5° end or side cutting angle for smoother cuts.
●Superior Hardness: Bar hardness rated at approximately 45 HRC for enduring rigorous use.
●Premium Surface Finish: The extremely fine gloss finish aids in friction reduction and longevity.

[3  & 8   with CCMT21.5 inserts]




[5  & 8   with CCMT32.5 inserts]




[1   with CCMT432 inserts]




[1   with CCMT32.5 inserts]




[1  & 2   with CCMT32.5 inserts]




[3  & 4   with CCMT32.5 inserts]





Description

1 x 12 RH SCLCR Indexable Boring Bar Holder with 10 Pcs of CCMT32.51 or CCMT32.52 Inserts, #P252-S408INS

Product features:     

  • BPS101 Black/Yellow Coating Grade     
  • CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness     
  • Can bear high temperatures     
  • For steel and steel castings finishing to roughing processing     
  • Continue cutting to light interrupted cutting     
  • Machining of gray and ductile iron at low to medium cutting speed         
  • For hard materials continuous cutting and light interrupted cutting from finishing to roughing   
  • Wet and dry processing     
  • Combination of fibrous TICN and fine grained Al2O3 increases abrasion resistance and anti-chipping     
  • Preferred choice chip breaker on General Purpose Finishing

Features of chipbreaker: 

  • For medium-duty turning With broad capability for steel, stainless steel, grey and nodular cast-iron         
  • Operations: turning, facing and profiling       
  • Advantages: all-round, reliable with problem-free machining     
  • Limitations: depth of cut and feed, risk of overloading the cutting edge     
  • Components typically: axles, shafts, hubs, gears, etc 
 
 

Including 1 piece Indexable Boring Bar and 10 pieces CCMT 32.51 or CCMT32.52 inserts

1 x 12 RH SCLCR Indexable Boring Bar Holder with CCMT32.51 or CCMT32.52 Inserts, #P252-S408:

  • Shank Diameter: 1"
  • Overall Length: 12"
  • Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle
  • Boring from light roughing to finishing in small bores
  • Insert CCMT 32.51 or CCMT32.52 Included & Key Included
  • Accepts Inserts CCMT 32.51 or CCMT32.52
  • S16T-SCLCR4
  • Profiling bar for semi-finishing and finishing operations
  • Bar hardness approximately 45HRC
  • Extreme fine gloss finish
  • Negative 5 degree end & side cutting angle
  • Positive 80 degree diamond CCMT inserts

​10 PS/Box Carbide Inserts CVD Coating CCMT32.51 Black/Yellow #2200-1014:

  • ANSI #: CCMT32.51   
  • Insert Style: CCMT   
  • Insert Size: 32.51   
  • IC: 3/8   
  • Thickness: 5/32   
  • Thru Hole: 0.17   
  • Radius: 1/64   
  • 7 degree         
  • Insert Grade: BPS101         
  • Chip Breaker: MD         
  • Material: Carbide         
  • Coating: CVD Al2O3 TICN         
  • Machining Parts Material: Steel         
  • Machining Process: Finish

or ​10 Pcs/Box Carbide Inserts CVD Coating CCMT32.52 Black/Yellow, #2200-1016:
  • ANSI #: CCMT32.52
  • Insert Style: CCMT
  • Insert Size: 32.52
  • For Turning & Boring
  • IC: 3/8
  • Thickness: 5/32
  • Thru Hole: 11/64
  • Radius: 1/32
  • Material: Carbide
  • Coating: CVD Tin Al2O3 TICN
  • 7 degree