Overview
Deutsch DT Series of environmentally-sealed, connectors are designed speci cally for cable to cable applications on the engine or transmission, under the hood, on the chassis or in the cab. Where signal level circuits in harsh environmental conditions, where even a small degradation in connection may be critical, the Deutsch DT Series general purpose connectors will provide the reliability and performance at the lowest cost.

Key & Feature:
Temperature: Operating at temperatures -55°C to +125°C
Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.
Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.
Insulation Resistance: 1000 megohms minimum at 25°C.
Moisture Resistance: No cracking, chipping or leaking after 20 test cycles .
Dielectric Withstanding Voltage: Current leakage less than 2 milliamps at 1500 volts AC
. Thermal Cycle:No cracking.
Grommet: Silicone rubber
Insert Retainer: Thermoplastic
Receptacle Interfacial Seal: Silicone rubber
Shell: Thermoplastic
Wedgelocks: Thermoplastic

Item Specification:/
Housing Made out of Polyamide (PA)
Accepts contact size 16 (13 amps)
6 Pins arrangements, Inline mounting.
Contact Material Copper Alloy
Wire Insulation O.D Range: .095 - .150 (2.41 - 3.81)
Air Size 14-18 AWG (2.0 - .75)
RECOMMENDED STRIP LENGTH INCHES (mm) .150 - .200 (3.81 - 5.08)

Whats is included:
1x (6 pin) Deutsch Male Connector
1x (6 pin) Dectsch Female Connector
1x Wedge for Lock Female
1x Wedge for Lock Male
6x Male Crimp Type Terminals
6x Female Crimp Type Terminals