Feature

●Package Content: 4 Pack VL53L0X time-of-flight ranging sensor.
●The VL53L0Xs LGA package makes it difficult to use. It also operates at a recommended voltage of 2.8V, which can make interfacing difficult for microcontrollers operating at 3.3V or 5V. Our breakout board addresses these issues, making it easier to use, meanwhile keeping the overall size as small as possible.
●The sensing capability of VL53L0X can support various functions, including gesture sensing or proximity of various innovative user interfaces; wall detection, cliff detection, and collision detection of household appliances such as sweeping robots; bathroom products, such as faucets, soap dispensers, and Cell phones and flushers; other target applications include laptop user presence or power switch monitors, drones and Internet of Things (IoT) products.
●Working Voltage: 2.6V - 5.5V; Max Sensoring Distance: 2m
●Ranging measurements are available through the sensors I2C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.


Description

Descriptions:

Ranging measurements are available through the sensors I²C (TWI) interface, which is also used to configure sensor settings,

and the sensor provides two additional pins: a shutdown input and an interrupt output.

The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use.

It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V.

Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.

PIN Description

VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator,

you can instead use this pin as a 2.8 V input with VIN disconnected.)

VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.

GND The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.

SDA Level-shifted I²C data line: HIGH is VIN, LOW is 0 V

SCL Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V

XSHUT This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low

puts the sensor into hardware standby. This input is not level-shifted.Package included:

4* VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout for Arduino