Feature(may vary by option.)
●【Specifications】- Drilling diameter: 50mm / 1.97-inch; Total length: 80mm / 3.15-inch; Shank diameter: 10mm / 0.39-inch. Hex shank, cemented carbide cutter and high-quality carbon structural steel (45# steel) body.
●【Features】- Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation.
●【Applications】- Can be used for drilling holes on wood and plastic products, furniture, door hinge. Used on cutting wood, plywood, solid wood boards, MDF, plastics, fiberglass etc.. Forstner drill bit is for ordinary purpose.
●【Application Range】- Suitable for bench drill, vertical drilling machine, hand held electric drill, impact drill, CNC carving machine and other drill press.
●【Warm Tips】- Can not be used for cutting metal holes. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits.
[50mm]
[60mm]
[40mm]
[42mm]
[53mm]
[55mm]
[45mm]
Description
Utoolmart Forstner Drill Bits, 40-65mm Dia., 80mm Length, Hex Shank, Cemented Carbide Wood Cutter for Woodworking Hole Boring Bit (Silver)
PRODUCT FEATURES
Instructions for Woodworking Hole Opener
- Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work.
- Keep the vertical angle with the workpiece when working. After the hole opener drills through the workpiece, the workpiece should be withdrawn while the hole opener is rotating. Please clean the sawdust in time to avoid opening failures during continuous work.
- Workers should wear corresponding protective equipment when working to protect them from working safely, and apply rust oil after use to extend the service life.
Two Spurs and Center Spur
- Two spurs and centering point can offer repeated, clean and accurate cutting holes.
- The sharp center spur accurately locates the center of the hole.
|
|
|
|
|---|---|---|
Tungsten Carbide Cutting Tip
|
Hex shank
|
Great Performance
|
WIDE APPLICATIONS
1. This forstner drill bits are suitable for cutting holes onto most wood and wood products. Can easily enlarge existing holes and bore any arc of a circle. Drills flat bottom holes, pocket holes, and overlapping holes.
2. Suitable for drilling low hardness wood such as density board, pressed board, plastic, hard wood, etc.
3. This forstner drill bit is suitable for bench drill, vertical drilling machine, CNC carving machine, etc. The bit in the positioning is required to very low speed, and then gradually accelerate after complete position. Add water for lubrication and temperature reduction when drilling.
4. NOTE:
- (1). This forstner drill bits can not be used for cutting metal holes. Before drilling, be sure no nails or other metal objects in wood to avoid causing damage to forstner drill bits.
- (2). The cutting material must be fixed and the drill bit should be perpendicular to the material. If the cutting material moves during drilling, the tool or material will be broken.
- (3). Tungsten carbide cutting tip with special heat treatment for sharp cutting edge, high hardness, non-burrs and durable use. Arc curve design head for easy chip-removal, more efficient perforation.
