Step 1: - 1. Put the 9V battery in. (not included).
- 2. Take off the probe cap.
|
Step 2: - Turn on the switch, the power indicator is on.
- Wait few seconds for the probe to heat up until another indicator is lighting up.
|
Step 3: - If you test diamond, you then need to turn on the number of lights corresponding to the indoor temperature and diamond weight.
|
Step 4: - If you test other gems, youd better calibrate the probe before testing, Method: by placing the probe vertically on a piece of glass, then adjusting the light to 5, and then placing the probe on the gemstone to test.
|