Specifications:

Material: PE plastic

Color: White

Working pressure: 2 bar / 30 psi

Max. Pressure: 4.8 bar / 70 psi

Brake Bleeder Capacity: 3L;----Bottle Capacity: 1L

Manometer 0-70psi (0 -5bar) with E20 adapter

Filling procedure:

1. Make sure that no pressure remains in the device. The pressure can be released from the approved valve on the side of the pump.

2. Remove the cap on top of the unit and refill the unit with new brake fluid. Make sure that there is no waste liquid or foreign bodies in the tank.

Application:

1990-up all model Alfa Romeo;----1990-up all model Audi;----1990-up all model Bentley

1990-up all model BMW;----2006-up Veyron model Bugatti;----2007-2011 Avea model Bugatti

2009-up Cruze model Chevrolet and 2012-up Malibu model Chevrolet;2003-up Crossfire model Chrysler;

2007-up all model Fiat;---- All year Contour model Ford; All year Focus model Ford and 2005-up Mustang model Ford.

1990-up all model Land Rover;----1990-up all model Lambogrhini;----1990-up all model Mercedes;

1990-up all model Mini Cooper.----1990-up all model Porsche.----1990-up all model Renault.

2006-2012 SX4 model Suzuki; 2007-up Splash model Suzuki;1996-up Swift model Suzuki;

2003-2009 Corolla model Toyota; 2009-2014 Verso model Toyota; 2006-2014 Yaris model Toyota;

1990-up all model Volvo;---- 1990-up all model Volkswagen.

NOT FIT pickup truck

Note:

Do not disconnect the adapter before releasing the pressure.

Operation:

1. Install the adapter on the master cylinder of the brake system.

2. Pump the handle of the device up and down until the recommended bleeding pressure is reached. Open the brake nipple and connect it to the appropriate breather tank. Once you see the new liquid coming into the container, close the nipple. Repeat the process on all 4 wheels (in any order).

3. When the brake fluid is flowing, ask a helper to depress the brake pedal as you watch the fluid flow through the clear tube. More than a few strokes can drain the master cylinders reservoir, so remember to keep checking it and refill it if necessary.

4. When the process is complete, release the pressure by pushing the drain valve on the side of the pump down. After disconnecting, disconnect the fluid supply hose from the adapter on the master cylinder.