ADJUSTABLE TWIN BLADE hole cutter kit
with infinite adjustment 1-7/8” to 12” for faster cutting for recessed lights, ceiling speakers, ducts with perfect balance
One hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.
Uses 7mm pilot bit, Hole Pro SKU HP1197.
Tough 14" OD ABS Shield - Needs 1/2" drill chuck – Take a quarter the power of hole saws so bigger holes easily cut
High Speed Steel and Tungsten Carbide Blades with 1-1/8” cutting depth replaced in seconds
Cutting depth 1-1/8” from a side, 2-1/4” if can be cut from two sides
NO NEED for BALANCE BARS as with SINGLE BLADE models that can break off
INCLUDES
-Pro grade adjustable hole cutter
-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap all dust and shavings
-Sturdy Carry Case
-Replaceable blades and Pilot Bit
- --Narrow kerf High Speed Steel (HSS) for wood, plastics, acoustic tile, tongue & groove, laminates, rubber
---Tungsten Carbide blades for drywall, plaster, Hardi board, fiberglass, chipboard, OSB, plywood, MDF
-hex wrenches
The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings.
Vacuum adapter (HP1174 --NOT INCLUDED -- shield does not include precut hole) available for connecting shop vac where asbestos or lead paint exists
MAX DIAMETER holes in Plywood and Engineered woods such as OSB is 8"
Do NOT USE with STUD DRILLS
NOT MADE FOR USE WITHOUT PILOT BIT
Recommend testing in scrap material to get used to tool and confirm cut hole size