No Calibration Pen Type pH Tester USER GUIDE
Quick Step for Use:
1. First time use or long time not use, turn off the meter and put sensor in the sample liquid (don’t put sensor in distilled water) for about 2-5 minutes. Shake it gently in the sample.
2. Long press ON/OFF button to start test, meter will display pH and temperature value alternately. Value will automatic hold when stable.
3. Short press ON/OFF, meter will test again.
4. Long press ON/OFF meter will shut off.
5. After 5 months or accuracy not good, meter in shut down state, long press about 15 seconds, till meter display “dEFA", release button and meter will reset to factory default.
Calibration (For professional user only!)
1. Though this meter no need calibration and easy to reset to factory default, it also can calibration by professional user.
2. Shut down meter, put sensor in the 6.86buffer solution, shake it gently and wait for 2 minutes.
3. Long press ON/OFF about 10 seconds till meter display “CALI”, meter will automatic calibration and no need any operation. After calibration finish, meter will turn off.
Range: 0.0~14.0
Resolution: 0.01
Temperature: 0~60℃
Weight: 45g
Dimension: 173 x 20 x 18mm