Feature

●400W Adjustable Multi Speaker:Power: 400W or Lower; Impedance: 4 to 16 ohm;Frequency: Adjustable
●4 Jumpers Design: Speaker Board Come with 4 Jumpers Which Can Help Optimize Audio Effect: Jumper A, B for Bass; Jumper C, D for Treble
●High Quality:Frequency Divider Made of Oxygen-Free Copper Winding, Pure Copper Wire 08 Wire Diameter,Super Capacitors, Reasonable Design and the Quality of the Sound is Adjustable
●Convenient to Use:400W Adjustable Multi Speaker is a Multi-Purpose, Comprehensive Debugging, Welding Free, Very Convenient to Use and the Effect of Listening Can be Adjustable According Your Hobbies
●Wide Application:400W YLY-2088 Adjustable Multi Speaker Widely Applied for Treble+Bass Bisection Speaker, 2.1 Treble Small Satellite Box,Car Full Frequency Speakers,It Can be Used as a Single Treble or Single Bass


Description

400w400w

400W Adjustable Multi Speaker:

  • Power: 400W or Lower
  • Impedance: 4 to 16 Ohm
  • Frequency: Adjustable

400W400W

ww
4 Jumpers:

  • Jumper A, B for Bass
  • Jumper C, D for Treble
  • A+D=Better Bass
  • A+C=Clear Treble and Bass
  • A+CD=Clear Treble and Bass (the Overall Effect Inclined Towards Treble)
  • AB+CD=More Mediant Frequency. When Bass Effect is High Unnecessarily, We Can Remove Cap A

400W YLY-2088 Adjustable Multi Speaker

Features:

  • Suitable for Speaker Power: 400W or Lower
  • Suitable for Speaker Impedance: 4 to 16 Ohm
  • Inductance Adopts Anaerobic Copper Winding , and Pure Copper Wire
  • Super Capacitors, Reasonable Design and the Quality of the Sound is Adjustable
  • Implementing Overall Debugging, No Welding, Using Very Convenient

  • Wide Application:
  • The Crossover Soprano + Available Bass Binary Frequency Sound Box, Can be Used in 2.1 the High Small Satellite Box and Automotive Loudspeakers as Well
400w400w

Details About Jumpers:

Jumper A, B are used to control audio effect of bass range. A for lower limit while B for upper limit of the bass audio range. For some speakers, when Bass is turned up too much, the speaker will show distortion. When that happens: we remove the jumper cap of jumper A to limit super low Bass to bring distortion lower. When we remove the cap of jumper B, Bass is increased while cap of Jumper B is on, Bass is decreased. Jumper C and D are used to control Treble range. When cap of both jumper C and D are on, the sound of treble is loudest. When only cap C is on, the treble sound is lower. When only cap D is on, further lower. When both caps of C and D are removed, there is no treble sound. (Generally speaking, with the four jumpers, youd sooner or later find your best sound effect. Anyway, all effects still depend on your actual test.)