Feature(may vary by option.)

●Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #8 countersink drill bit set for wood. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills. All same size replacement tapered drill bit for drill countersink
●THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 drill bit replacement set. FTG drill bit replacement set made with tapered countersink bits for wood. Countersink replacement bits set with tapered drill bits. Top Quality 3/16 inch tapered and double flute drill bit; HSS M2 Grade 6542 the most popular High-Speed Steel, for its high toughness, and good cutting edge retention. FTG 2347RPL countersink replacement drill bit set for drill bits with countersink
●Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits
●Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set. Packaging set combination unique design protected by US Copyright Office
●STORAGE CONTAINERS for this set available below on this page at section " Make it a bundle". Replacement counter sinker drill bit designed in New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analysis Report issued by ANAB US Accredited Lab, confirms that drill bits set High Speed Steel Quality countersink bits meet desired specs of HSS M2 Grade 6542, drill bit set harder than HSS 4241 and HSS 4341 used in other similar tapered countersink drill bits

[#8 (11  & 64  ) Standard Flute  & Hex Shank]




[#TEN (3  & 16  ) Parabolic Flute  & Straight Shank]




[#TEN (3  & 16  ) Standard Flute  & Hex Shank]




[#6 (9  & 64  ) Parabolic Flute  & Straight Shank]




[#6 (9  & 64  ) Standard Flute  & Hex Shank]




[#4 (7  & 64  ) Standard Flute  & Hex Shank]




[#8 (11  & 64  ) Parabolic Flute  & Straight Shank]





Description

FTG USA 3 Piece Same Size #10 (3/16") Replacement Drill Bit Only Value Pack features the best tapered drill bits HSS M2 for woodworkers. Logo brand is laser printed on each shank making it easier to differentiate this quality brand from others. Super sharp, very durable, easy to use, and built to perform well in both hard and soft woods. This is a Replacement Drill Bit Only, made to replace the bit of #10 (3/16") Countersink FTG 2347 and 3 Piece #10 Value Pack FTG 2348. This product is manufactured in China at FTG USA specifications.

Single piece countersink #10 (FTG 2347) and Triple countersink set #10 (FTG 2348) are available on Amazon store: www.Amazon.com/FTGUSA

FTG 2347RPL 3 Piece Same Size 3/16" (#10) Replacement Countersink Drill Bit Only with Hex Key (1/8" Allen Key) - Tapered HSS Dill Bit

dathdath

vbmxfgvbmxfg

tui;tui;

3 Pieces same size (#10) 3/16" Replacement Countersink Drill Bit Only and Hex Wrench

Product consist of 3 Piece Replacement 3/16" Drill Bits Only Without the Four-cutter Countersink, made to replace the 3/16" bit of #10 single Countersink FTG 2347 and #10 triple Countersink FTG2348. One piece Hex Wrench (1/8" Allen Key) included.

FTG 2347RPL packaging set combination/design protected by US Copyright Office

Top Quality material components highly durable HSS M2 3/16 inch tapered and fluted drill bit; by far the most popular High Speed Steel, for its high toughness, Grade 6542, wear resistance, and good cutting edge retention

Tapered drill pointed tip with widened flutes for drilling fast, clean pilot holes and ensures tight fit for screws;

FTG USA always made with Best Quality Materials: High Speed Steel M2 Grade 6542

HSS HSS

Logo brand and material component are laser printed on each countersink shank

Widened double flutes = Fast drilling

Compatible with all 1/4 inch quick change chucks, including impact drills

FTG Maximum Torque means = Bits secured with pin will Never come loose from hex shank

Countersink sets and replacement tapered bits available in FTG USA store: www.Amazon.com/FTGUSA

chosen 1chosen 1

vfvf

mktmkt

3 Piece #10 (3/16") Replacement Countersink Tapered Drill Bits and 1 Allen Key

Universal 1/4 inch hex shank prevents slipping in standard chucks and is compatible with all 1/4 inch quick-change chucks, including impact drills

The counterbore dual set screws attaches to flat for a secure fit - no slip

This product is Professionally manufactured in China at FTG USA specifications; Logo brand laser printed on each countersink shank offering confidence in product authenticity.

FTG 2347 single countersink #10 available at www.Amazon.com/FTGUSA

These tapered drill bits are the replacements bits for the #10 FTG 2347 (photo of packaging displayed above) for extended life; Also for triple countersink pack #10 (3/16") FTG 2348.

All the products are available on FTG USA store on Amazon: www.Amazon.com/FTGUSA

fajfgnfajfgn

Logo brand and material component are laser printed on each shank

Best Quality Materials: High Speed Steel M2 Grade 6542

Whats in the box

  • 3 Piece Replacement Countersink Drill Bit