JESTUOUS ANNULAR CUTTER
1.The cutting speed:VC=20-25m/min
2.The reasonable rotate feed amount shall be fn=0.08-0.13mm/r.The reasonable feed rate shall be vf=36-60mm/min. "Weldon shank" annular cutters have 2 flats and fix in the chuck by tightening grub screws in the two flat areas.
3. Insert the ejector pin inside the annular cutter.Fill the coolant tank with oil lubrication,never use the machine without lubricant.
Annular Cutter Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth | Annular Cutter JESTUOUS 3/4 Inch Weldon Shank 1-3/4 Cutting Diameter | Annular Cutter JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Diameter 2 Cutting Depth | Annular Cutter JESTUOUS 3/4 Inch Weldon Shank 1/2 Cutting Diameter | Annular Cutter JESTUOUS 3/4 Inch Weldon Shank 7/16 Cutting Diameter | Annular Cutter Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth | |
---|---|---|---|---|---|---|
High speed steel | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
3/4 weldon shank | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
2 cutting depth | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
pilot pin included | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
Packaging with plastic case | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |