Feature(may vary by option.)

●Port Number: 2 / 3 / 5 ；Terminates 28-12 AWG；Rated Voltage: 250V/4KV; Rated Current: 32A; Wire Crosssection:0.08~4.0mm²(Hard wire), 0.08~4.0mm²(Soft wire).
●Wiring length: 9-10mm; Shell Material: flame-retardant nylon PA66; Guide Strip: Electrolytic copper (Surface tin plating); Spring: Nickel chromium alloy steel
●Selecting the best flame retardant insulating material, which is long life, no corrosion, anti-aging, pressure 4KV and against electrical shock.
●The operation is simple, you can quickly connect and disconnect the wires, peel off the insulation layer of the wires by 10mm, push the orange handle of the connector up by 90 degrees, insert the wires, and then push the handle down.
●Packed in a box, sealed and stored for easy access and storage. A total of 65PCS (2 Port: 35 Pcs; 3 Port: 20 Pcs; 5 Port: 10 Pcs)

[65PCS]

Description

Lever Wire Connectors

Which can connect multiple sets of wires, freeing up a good amount of spacea and times,

They are compact, super easy, reliable and reusable.

Connector wiring demonstration

Strip off the wire casing with a length of 10mm

Press 1 to plug in for two seconds for wiring

Open the handles of the connectors in sequence and insert the wires into the inlet port

Press the handle down to complete the installation

Insert an electric pen into the test hole on the top of the terminal to test the circuit

Lever Wire Connectors

Port Number: 2 / 3 / 5

These reusable connectors make the job much easier and neater, technological innovation reduce wiring time by 70%.

Packed in a box, sealed and stored for easy access and storage.

The connector for joining braided and solid wire and wires of differing sizes.

Video Player is loading.

Current Time 0:00

Duration 0:44

Loaded: 10.30%

Stream Type LIVE

Remaining Time 0:44

Insulated flame-retardant shell

Made of nylon PA66, which is flame retardant and temperature resistant.
Test hole design

Visual inspection of whether the wire diameter meets the standard: Terminates 28-12 AWG
The wires are tightly clamped

Built in stainless steel clamp spring design, ensuring stable wire clamping
performance

Rated Voltage: 250V/4KV; Rated Current: 32A