●[DOUBLE GROOVES] -- We have 7 kinds of doubel groove grindometer: 0-15μm and 0-25μm ( index value is 2.5μm), 0-50μm ( index value is 5μm), 0-100μm ( index value is 10μm), 0-150μm and 0-200μm and 0-300μm ( index value is 15μm). The fineness meter is made of forged stainless steel with a sloping groove. Scale in microns (μm), the accuracy of fineness plate grooves ± 1μm. ●[USING & READING] -- Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness. ●[READING UNIT: μm/MIL] -- Correspondence between micron (μm) and mil (MILS) as follows: 1 mil = 25.4 um. Model 15μm/150μm/200μm/300μm with reading unit μm, Model 25μm/50μm/100μm with reading unit μm/MIL ●[HOW TO CHOOSE GRINDOMETER] -- Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison. ●[NOT ONLY FOR PAINT] -- BAOSHISHAN paint grind gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use the gauge for fineness detection.
[JL-300um]
Description
HOW TO CHOOSE GRINDOMETER
Choose a fineness gauge 5-10μm higher than the product fineness range you measured.
Single groove means only one scraping groove, Double grooves refer to two scraping grooves, which are convenient for comparison.